Verizon FSNO21VA User Manual page 115

NETWORk SETTINGS
Caution:
instructed to by Verizon. Changes could adversely affect
the operation of your Gateway and your local network.
Verify the following information:
– IP Passthrough IP Passthrough – select to disable Wi-Fi and routing
capabilities of the Gateway. May be necessary if
connecting 3rd party routers to the Gateway and
disabling the IP Passthrough mode into the device.
– Status Status – displays the connection status of a specific
network connection.
– Action – contains an Edit Action
generates the next level configuration page for the
specific network connection or network device.
• IP Address Distribution IP Address Distribution
The IP Address Distribution IP Address Distribution section is used to configure
the Dynamic Host Configuration Protocol (DHCP) server
parameters of your Gateway.
Once enabled and configured, the DHCP server
automatically assigns IP addresses to any network
devices which are set to obtain their IP address
dynamically.
If DHCP Server is enabled on your Gateway, configure
the network devices as DHCP Clients. There are 2 basic
options in this section: Disabled
To set up the Gateway's network bridge to function as a
DHCP server:
Do not change these settings unless specifically
Disabled and DHCP Server
Edit hyperlink that, when clicked,
DHCP Server.