Verizon FSNO21VA User Manual page 39

To configure the security settings for your guest network:
1. From the Basic
Network Network.
2. Move the selector to on
3. If desired, enter a new name and password for the
Wi-Fi network or leave the default name and password that
displays automatically.
4. Press Apply Changes Apply Changes to save the changes.
Important: It is not recommended to create a guest network
without a password.
3.1c/ IOT NETWORK
The Gateway supports connection of multiple IoT devices on a
separate Wi-Fi SSID. The IoT Network is designed to provide an
easier setup experience for your Internet of Things (IoT) devices
which benefit from connecting to the 2.4 GHz band while keeping
your Primary Network settings unchanged. IoT devices and Primary
devices can communicate with no firewall restrictions separating
them.
The Gateway is shipped from the factory with IoT Wi-Fi turned
off. The default SSID for IoT Wi-Fi is preconfigured at the factory
to the default Wi-Fi network name (SSID) which is displayed on a
sticker located on the back of the Gateway followed by hyphen IoT
(-IoT). For example, if the Gateway is shipped with a default SSID
of "Verizon-ABCDE" then the default SSID for IoT Wi-Fi is "Verizon-
ABCDE-IoT".
http://setup.verizon.com/businessinternetgateway |
Basic menu, select Wi-Fi
on.
Wi-Fi and then click Guest
©2023 Verizon. All Rights Reserved
03 / WI-FI SETTINGS
39
Guest