NETWORk SETTINGS
LAN IPv6 Stateful (DhCPv6) with No WAN Settings
1.
To configure IPv6 LAN Stateful mode with no WAN
connection, select the Stateful option on the IPv6
Configuration Controls page as shown below:
Configuration Controls
2.
Specify the Stateful (DHCPv6)
LAN IPv6 addresses by entering the following details:
•
IPv6 LAN Configuration (select Stateful
IPv6 LAN Configuration
dropdown list)
•
DHCPv6 Client Address Range (start and end)
DHCPv6 Client Address Range
•
LAN Link Local Address
LAN Link Local Address (automatically populated)
•
Router Advertisement Lifetime (minutes between 0-150)
Router Advertisement Lifetime
Stateful (DHCPv6) settings to be used to assign
IPv6
Stateful from the