Table of Contents
Advertisement
NETWORk SETTINGS
•
IPv6 LAN Configuration
IPv6 LAN Configuration (select Stateless
dropdown list)
•
LAN Prefix
LAN Prefix (automatically populated)
•
IPv6 LAN Address
IPv6 LAN Address (automatically populated)
•
LAN Link Local Address
LAN Link Local Address (automatically populated)
•
Router Advertisement Lifetime
Router Advertisement Lifetime (minutes between 0-150)
•
Option: Allow ICMPv6 Echo Request for LAN devices
Option: Allow ICMPv6 Echo Request for LAN devices
using their Global IPv6 Address from WAN side -
using their Global IPv6 Address from WAN side
requesting an IPv6 address from any available DHCPv6
servers available on the ISP
3.
After entering all appropriate IPv6 settings, click Apply
changes
changes to have changes take effect.
Static - WAN IPv6 Address Connection
The IPv6 WAN Static configurations are IPv6 settings that you
enter manually. These specific IPv6 addresses and settings are not
expected to change frequently.
1.
To configure IPv6 WAN Static mode, select the Static
on the IPv6 Configuration Controls
IPv6 Configuration Controls page as shown below:
Stateless from the
Apply
Static option
- Quick Links:
- Advanced Settings
- Network Settings
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
