Integrated Peripherals - Shuttle HOT-595 User Manual

Integrated Peripherals

OnChip IDE First Channel
This item is used to defined on chip Primary PCI IDE controller is Enable or Disable
setting.
OnChip IDE Second Channel
This item is used to defined on chip secondary PCI IDE controller is Enable or Disable
setting.
IDE Prefetch Mode
Enable prefetching for IDE drive interfaces that support its faster drive accesses. If you
are getting disk drive errors, change the setting to omit the drive interface where the
errors occur. Depending on the configuration of your IDE subsystem, this field may not
appear, and it does not appear when the Internal PCI/IDE field, above, is Disabled.
The choice: Enabled, Disabled.
IDE HDD Block Mode
This item is used to set IDE HDD Block Mode. If your IDE Hard Disk supports block
mode, then you can enable this function to speed up the HDD access time. If not,
please disable this function to avoid HDD access error.
IDE Primary Master PIO
In these items, there are five modes defined in manual mode and one automatic mode.
There are 0, 1, 2, 3, 4, and AUTO is the default settings for on board Primary Master
PIO timing.
38