Bios Setup - Shuttle HOT-595 User Manual

6
6

BIOS Setup

HOT-595 BIOS ROM has a built-in Setup program that allows users to modify the basic
system configuration. This type of information is stored in battery-backed RAM so that it
retains the Setup information when the power is turned off.
Entering Setup
Power on the computer and press <Del> immediately will allow you to enter Setup. The
other way to enter Setup is to power on the computer, when the below message appear briefly
at the bottom of the screen during the POST (Power On Self Test), press <Del> key or
simultaneously press <Ctrl>,<Alt>, and <Esc> keys.
"TO ENTER SETUP BEFORE BOOT PRESS CTRL-ALT-ESC OR DEL KEY"
If the message disappears before you respond and you still wish to enter Setup, restart the
system to try again by turning it OFF the ON or pressing the "RESET" button on the system
case. You may also restart by simultaneously press <Ctrl>,<Alt>, and <Delete> keys. If you
do not press the keys at the correct time and the system does not boot, an error message will
be displayed and you will again be asked to,
"PRESS F1 TO CONTINUE, CTRL-ALT-ESC OR DEL TO ENTER SETUP"
23