1. Manuals
  2. Brands
  3. Shuttle Manuals
  4. Motherboard
  5. Spacewalker HOT-685V
  6. User manual

Shuttle Spacewalker HOT-685V User Manual

Ppga celeron processor based agp main board
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HOT-685V
PPGA Celeron processor
Based AGP
MAIN BOARD
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Spacewalker HOT-685V and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Shuttle Spacewalker HOT-685V

Summary of Contents for Shuttle Spacewalker HOT-685V

  • Page 1 HOT-685V PPGA Celeron processor Based AGP MAIN BOARD User's Manual...
  • Page 2 The information contained in this manual is provided for general use by the customers. Trademarks Spacewalker is a registered trademark of Shuttle Inc. Intel, Celeron is a registered trademarks of Intel Corporation. VIA is a registered trademarks of VIA Corporation.
  • Page 3 Federal Communications Commission (FCC) Compliance Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reason- able protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy.

  • Page 4: Table Of Contents

    ABLE ONTENTS ............5 HAPTER NTRODUCTION .............. 6 HAPTER EATURES Accessories of HOT-685V ................8 .......... 9 HAPTER ARDWARE NSTALLATION The Installation PPGA Celeron Processor ............9 Jumpers ......................10 CPU Clock Speed and ratio Selection - JP2, J113 and JP9 ......10 Special Tip for User's Reference Only.............

  • Page 5: Chapter 1 Introduction

    NTRODUCTION HOT-685V is a highly integrated IBM PC/AT compatible system board designed to meet the industry's most demanding desktop applications. Based on the VIA Apollo Pro Plus chipset which support up to 500MHz PPGA Celeron processor with MMX technology. HOT-685V is equipped with an Accelerated Graphics Port (A.G.P.), a high- performance interconnect for graphic-intensive application, such as 3D applica- tions.

  • Page 6: Chapter 2 Features

    EATURES The HOT-685V Mainboard is carefully designed for the demanding PC user who wants high performance and many intelligent features in a compact package: Intel Chipset: Features VIA Apollo Pro Plus chipset. CPU Support: Intel PPGA Celeron processor 300 ~ 500 MHz. Versatile Memory Supports: Supports three banks of normal or PC/100 SDRAM maximum memory size up to 768 MB.
  • Page 7 ACPI: Support ACPI (Advanced Configuration and Power Interface) function. ACPI provide more Energy Saving Features for the future operating system supporting OS Direct Power Management (OSPM) functionality. Board Size: AT form factor, dimension 220mm x 230mm. Advanced Features: Low EMI -- Using built-in Spread Spectrum with 1.5% modulation and automatic clock shut- off of unused PCI/SDRAMS slots to reduce the Electromagnetic Interference (EMI).

  • Page 8: Accessories Of Hot-685V

    ACCESSORIES OF HOT-685V - 8 -...

  • Page 9: Chapter 3 Hardware Installation

    ARDWARE NSTALLATION The Installation PPGA Celeron Processor HOT-685V mainboard provides a 370-pin ZIF Socket370 for Intel PPGA Celeron CPU. The CPU that came with the mainboard should have a fan attached to it to prevent over- heating. If this is not the case then purchase a fan before you turn on your system. To install a CPU, first turn off your system and remove its cover.

  • Page 10: Jumpers

    Jumpers Several hardware settings are made through the use of jumper caps to connect jumper pins on the main board. The jumper's pin 1 on main board will be on the top or on the left when holding the main board with the keyboard connector away from yourself. Jumpers with two pins will be shown as for Close (On) and for Open (Off).

  • Page 11: Special Tip For User's Reference Only

    Special Tip for User's Reference Only HOT-685V mainboard provides a special Jumper J10 to overspeed your 66 MHz based Intel PPGA Celeron processor to 100 MHz. Normally, CPU Host Clock 100 ~ 150 MHz are not available for 66 MHz based processor. But, when pull out mini jumper from J10 (let it open), the user can Hard-Configure your 66 MHz based processor to 100 MHz based.

  • Page 12: At And Atx Power Supply Connectors Setting - J112

    AT and ATX Power Supply Connectors Setting - J112 The mainboard provides both 12-pin AT type and 20-pin ATX type power supply connectors. Jumper J112 is used to set which type of power supply is used. J112 Close (On) for AT Power Connector. J112 Open (Off) for ATX Power Connector.

  • Page 13: Connectors

    Connectors Front Panel Connectors (JP10) Speaker Connector - SPKER PC speaker connector may attach a 4-pin PC speaker cable from the case to this connector. HDD LED Connector - HDD-LED Attach a 2-pin IDE drive LED cable to this connector. The LED lights when an IDE device is active.
  • Page 14 Other Connectors AT and ATX Power Supply Connectors AT Power Connector is a 12-pin male header connector. Plug the connector from the power directly onto the board connector while making sure the pin 1 is in its position. The main board requires a power supply with at least 200 watts and "power good signal".
  • Page 15 AT Keyboard & PS/2 Mouse Header or PS/2 Keyboard & PS/2 Mouse Connector AT Keyboard & PS/2 Mouse Header: One 5-pin female AT keyboard & one 5-pin PS/2 mouse header is located at the rear of the main board. The main board provides a 5-pin PS/2 mouse header for an optional PS/2 mouse cable.
  • Page 16 IDE, Floppy, Parallel and Serial port connectors The mainboard package has included one 40-pin ribbon cable for IDE H.D.D, one 34-pin ribbon cable for F.D.D, one 25-pin ribbon cable for printer and two 9-pin ribbon cables for COM port devices. Flat cables should be connected with the red stripe on the pin 1 side of the connector.
  • Page 17 Port SJ2 can be used to connect a modem audio line to HOT-685V. You would use this connector when telephone answering machine software for input and output. SJ2 (TAD) pin assignment : 4 = MONO 3 = Ground 2 = Ground 1 = PHONE CD-IN Port SJ1 is used to attach a CD-ROM audio connector.

  • Page 18: Chapter 4 Memory Configuration

    EMORY ONFIGURATION The HOT-685V mainboard provides three 168-pin DIMM sockets that make it possible to install from 8MB up to 768MB of SDRAM. The DIMM socket support 8MB, 16MB, 32MB, 64MB, 128MB and 256MB 3.3V single- or double- side SDRAM DIMM. The three DIMM sockets are arranged in three banks of one socket each.

  • Page 19: Chapter 5 Windows 98 Installation Note

    2) Download the driver from VIA WEB site at: http://www.spacewalker.com/english/download.htm Step 3:Restart Windows 98 Step 4:Install the Shuttle Patch utility v2.6 or above. For the location of the driver, please refer to the instructions below: 1. Look into the Shuttle CD that came with the mainboard, under directory: <CD:\MAINBRD\PATCH9X\>...
  • Page 20 Special Note: We have not encountered problems yet. However, if you do experience problem at the initial stage of Windows 98 installation, remove all add-on cards, except the Video card, and restart the installation process. After the Windows 98 installation is completed, follow the aforementioned STEPS. Then put the add-on cards back in, and continue with the installation of the driver for the add-on cards.

  • Page 21: Chapter 6 Flash Utility

    LASH TILITY This chapter briefly discusses Award Flash utility in order to guide you through updating your old BIOS. The file name we use to program here is test.bin, and the file name to save old BIOS is 685V.OLD. Please note that those file names are not absolute.
  • Page 22 If “Yes” To save the old BIOS: 1. Please respond “Y”, and then press the ENTER key. 2. Move the cursor to “File Name to Save: “ 3. Type file name “TEST.BIN”, and then press the ENTER key. (Your old BIOS will be saved in the file name you create.
  • Page 23 BIOS S ETUP The BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press <Del>...

  • Page 24: The Main Menu

    The Main Menu Standard CMOS Setup This setup page includes all items in a standard compatible BIOS. BIOS Features Setup This setup page includes all items of Award special enhanced features. Chipset Features Setup This setup page includes all items of chipset features. Power Management Setup This setup page includes all items of Power Management features.
  • Page 25 Integrated Peripherals This setup page includes all items of peripheral features. Supervisor Password Change, set, or disable supervisor password. It allows you to limit access to the system and Setup, or just to Setup. User Password Change, set, or disable user password. It allows you to limit access to the system and Setup, or just to Setup.

  • Page 26: Standard Cmos Setup

    Standard CMOS Setup Date The date format is <day>, <month> <date> <year>. Press <F3> to show the calendar. Time The time format is <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. For example. 5 p.m. is 17:00:00. Hard Disks Type This item identify the types of hard disk drives that has been installed in the com- puter.
  • Page 27 Drive A type / Drive B type This item specifies the types of floppy disk drive A or drive B that has been installed in the system. Video This item selects the type of adapter used for the primary system monitor that must matches your video display card and monitor.

  • Page 28: Bios Features Setup

    BIOS Features Setup Virus Warning When this item is enabled, the Award BIOS will monitor the boot sector and partition table of the hard disk drive for any attempt at modification. If an attempt it made, the BIOS will halt the system and the following error message will appear. Afterwards, if necessary, you will be able to run an anti-virus program to locate and remove the problem before any damage is done.
  • Page 29 Quick Power On Self Test This item speeds up Power On Self Test (POST) after you power on the computer. If it is set to Enabled, BIOS will shorten or skip some check items during POST. Boot Sequence This item determines which drive computer searches first for the disk operating system.
  • Page 30 Typematic Delay (Msec) When the typematic rate is enabled, this selection allows you to select the delay between when the key was first depressed and when the acceleration begins Security Option This item allows you to limit access to the System and Setup, or just to Setup. When System is selected, the System will not boot and access to Setup will be denied if the correct password is not entered at the prompt.

  • Page 31: Chipset Features Setup

    Chipset Features Setup Bank x/x DRAM Timing This value in this field is set by the system board manufacturer, depending on whether the board has paged DRAMS or EDO DRAMS. The choice: 70ns, 60ns. SDRAM Cycle Length This field allows you to set the SDRAM latency timer. The choice: 2, 3.
  • Page 32 System BIOS Cacheable This item allows the user to set whether the system BIOS F000 ~ FFFF areas are cacheable or non-cacheable. Video RAM Cacheable This is a new cache technology for the video memory of the processor. It can greatly improve the display speed by caching the display data.
  • Page 33 CPU Warning Temperature (optional) Since the mainboard support CPU temperature monitoring and overhear alert. This item allows the user to set the threshold of CPU warning temperature. When CPU temperature over the threshold, system will slow down clock to prevent CPU damage. Current System Temp (optional) Since the mainboard support System temperature monitoring and overheat alert.

  • Page 34: Power Management Setup

    Power Management Setup Power Management This item determines the options of the power management function. Max Saving puts the system into power saving mode after a brief period of system inactivity; Min Saving is the same as Max Saving except the time of the system inactivity period is longer;...
  • Page 35 Soft-Off by PWRBTN The setting of Instant-Off allows the ATX switch to function as a normal system power off button when pressed for less than 4 seconds. The setting of Delay 4 Sec. allows the button to have a dual function where to press the button for less than 4 seconds will place the system in suspend mode, and pressing the button for more than 4 seconds will shut place the system off.
  • Page 36 Modem Ring Resume When set to Enabled, any event occurring Modem Ring/activity of LAN will awaken a system which has been powered down. RTC Alarm Resume When set to Enabled RTC Alarm Resume, you could set the date (of month) and timer (hh:mm:ss), any event occurring at RTC will awaken system which has been powered down.

  • Page 37: Pnp/Pci Configuration Setup

    PNP/PCI Configuration Setup PNP OS Installed When this item is set to Yes, it will allow the PnP OS(Windows 95) control the system resources except PCI devices and PnP boot devices. Default setting is No. Resources Controlled By The Award Plug and Play BIOS has the capability to automatically configure all of the boot and Plug and Play compatible devices.
  • Page 38 PCI Dynamic Bursting When Enabled, data transfers on the PCI bus, where possible, make use of the high- performance PCI burst protocol, in which greater amounts of data are transferred at a single command. PCI Master 0 WS Write When Enabled, writes to the PCI bus are command with zero wait states. The choice: Enabled, Disabled.

  • Page 39: Integrated Peripherals

    Integrated Peripherals OnChip IDE Channel0 This item is used to defined on chip Primary PCI IDE controller is Enable or Disable setting. OnChip IDE Channel1 This item is used to defined on chip Secondary PCI IDE controller is Enable or Disable setting.
  • Page 40 Primary Master/Slave UDMA On this mainboard, VIA Apollo Pro Plus improves IDE transfer rate using Bus Master/Slave UltraDMA/33 IDE which can handle data transfer up to 33MB/sec. The options are Disabled, Enabled and Auto, Auto is the default settings for on board Primary Master UltraDMA33.
  • Page 41 UART Mode Select The main board support IrDA(HPSIR) and Amplitudes Shift Keyed IR(ASKIR) infrared through COM 2 port. This item specifies onboard Infra Red mode to IrDA 1.0, ASKIR, MIR 0.57M, MIR 1.15M, FIR or Standard (Disabled). Note : FIR is not available currently. RxD , TxD Active This item specifies the Active level for RxD &...

  • Page 42: Password Setting

    Password Setting This section describes the two access modes that can be set using the options found on the Supervisor Password and User Password. Supervisor Password and User Password The options on the Password screen menu make it possible to restrict access to the Setup program by enabling you to set passwords for two different access modes: Supervisor mode and User mode.
  • Page 43 FM801 PCI Audio Controller Software Installation User's Guide - 1 -...
  • Page 44 ABLE ONTENTS 1.SPECIFICATION....................3 2.DRIVER INSTALLATION.................4 2.1Windows95/98 Driver Installatioin..................4 2.1.1Installing FM801 Audio Controller Windows95/98 Driver..........4 2.1.2Verifying the FM801 Driver Installation for Win95/98............. 8 2.1.Q3D Control Panel......................10 2.1.4Driver un-installation......................13 2.2Windows NT 4.0 Driver Installatioin..................14 2.2.1Installing FM801 Audio Controller Driver...............14 2.2.2Verifying the FM801 installation for Win NT 4.0............18 2.2.3Windows NT4.0 Driver Un-installation................20 2.3For Machines running DOS (without windows)..............
  • Page 45 PECFICATION Features of FM801 PCI Audio Controller + PCI 2.1 Compliant + PCI Bus Power Management rev. 1.0 Compliant + PCI Bus Master For PCI Audio + AC97 ver. 2.0 Compliance + Microsoft DirectSound Complaince + Software 64-voice WaveTable Synthesizer support available + Native DOS Game Support without Software Emulation + Analog/Digital Joystick Interface + Legacy Audio compatibility...

  • Page 46: Driver Installation

    RIVER NSTALLATION The FM801 PCI audio controller has the following driver support, - Microsoft Windows95/98 - Microsoft NT4.0 - Native DOS The Win95/98 and DOS drivers were not just designed for the latest Microsoft compliance and direct sound games but also designed to support the legacy DOS SoundBlaster Pro compatible games.
  • Page 47 2. As Windows95/98 starts up, it will automatically detect the audio controller and start the driver installation. Winows95/98 will detect the audio controller as " PCI Multi media Audio Device" The Wizard will guide you to begins the driver installation. Click "Next"...
  • Page 48 5. Open up the folder or the directory that contains the driver and click " OK". 6. Press "Next" when the location is specified. - 6 -...
  • Page 49 7. Windows will detect the FM801 Audio/Game device when the driver has been properly located. Press "Next" again. 8. Windows now starts copying the files. Click " Finish" to finish the Audio/Game Device installation. - 7 -...

  • Page 50: 2Verifying The Fm801 Driver Installation For Win95/98

    9. FM801 Joystick Device should be found again. This is the second part of the installation. Repeat the same procedures indicated above from step 2 to step 8). 2.1.2 Verifying the FM801 Driver Installation for Win95/98 1. Open the System Properties screen by right click on " My Computer" and selecting "Properties".
  • Page 51 2. Click on the "Device Manager" tab. 3. Double-click "Sound, video and game controllers" from the hardware tree to verify the ForteMedia FM801 installation. You should see at least these four entries: FM801 Legacy Audio, FM801 Legacy Joystick, FM801 PCI Audio Device, and FM801 PCI Joystick Device.

  • Page 52: Q3D Control Panel

    2.1.3 Q3D Control Panel Q3D is a positional 3D audio technology provided by QSound Labs for use in accelerating current games with superb 3D rendering as well as featuring new output options and en- hancing acoustic environments for tomorrow's game titles. Positional 3D relies on access to multiple individual sounds in order to place them independently and dynamically in 3D space.
  • Page 53 - The Voice Manager allows users to choose for the desired buffers. - Mixing Options allows users to adjust the mixer and volume control. - 11 -...
  • Page 54 - Stereo Expansion is available with alternatives of adjusting the level of "Spread", the range of surround-sound to be around the listener, and "Center", the distance of the sound away from the play unit. - 12 -...

  • Page 55: 4Driver Un-Installation

    2.1.4 Driver un-installation 1. To uninstall the FM801 PCI audio controller drivers, first go to the Control Panel by clicking on the Start Menu, selecting Settings, and choosing Control panel. 2. Double-click the Forte Media Icon in " Control Panel". 3.

  • Page 56: Windows Nt 4.0 Driver Installatioin

    2.2 Windows NT 4.0 Driver Installation 2.2.1 Installing FM801 Audio Controller Driver FM801 Wave, Mixer,and FM-Syn Driver Installation 1. Turn on the PC 2. To open control Panel, please open " Start" icon located on the bottom-left corner of your screen, and select "Settings", then go to "Control Panel". 3.
  • Page 57 5. Click "Add" key as shown below. 6. An "Add" dialogue box is displayed. Select the " Unlisted or Updated driver" item, then click the "OK" button. - 15 -...
  • Page 58 7. An "Install Driver" dialogue box is displayed. Insert the driver in the CD-ROM drive. Search the directory in which the driver locates using " Browse", then click the "OK" button. 8. Select "D:\Audio\NT40\" folder for NT4.0 driver installation. - 16 -...
  • Page 59 9. An "Add unlisted or update driver" dialog box is displayed. Select the "FM801 Wave, Mixer and FM-Syn" item, then click the "OK" button to finiah. 10. Select "Restart Now" to reboot your system to complete the installation proccess. - 17 -...

  • Page 60: 2Verifying The Fm801 Installation For Win Nt 4.0

    2.2.2 Verifying the FM801 installation for Win NT 4.0 1. Open the Control Panel screen by clicking on the Start Menu, then selecting Settings, and then Control Panel. 2. Double-click on the Multimedia icon. - 18 -...
  • Page 61 3. Click on the Devices tab to bring up the software tree for multimedia drivers. FM801 should have installed five drivers as followed: - Audio for FM801 Wave, Mixer, and FM-Syn - MIDI for FM801 Wave, Mixer, and FM-Syn - Mixer for FM801 Wave, Mixer, and FM-Syn - Line Input for FM801 Wave, Mixer, and FM-Syn The following confirms a correct installation of the Windows NT drivers.

  • Page 62: 3Windows Nt4.0 Driver Un-Installation

    2.2.3 Windows NT4.0 Driver Un-installation 1. Go to the Control Panel by clicking on the Start Menu, selecting Settings, and then clicking on Control Panel. Double-click on the Multimedia icon. - 20 -...
  • Page 63 2. Select "Audio for FM801 Wave, Mixer and FM-Syn" under Audio Devices in the Multimedia Drivers tree. Click " Remove." key. 3. Windows will require confirmation before removing this software driver. Click " Yes" if you wish to uninstall this driver. 4.

  • Page 64: For Machines Running Dos (Without Windows)

    2.3 For Machines running DOS (without Windows) This package is intended for Machines running DOS with Windows as its operating System. There is DOS sub-directory in FM801 Software Package containing tools for DOS support. Installation Procedure for FM801 Device under Native DOS - Turn off your PC &...

  • Page 65: Setup Utility

    ETUP TILITY The Autorun utility can be run either through CD AutoRun feature implemented by Microsoft Windows if properly activated, or one may run it manually by executing the Setup program provided in the driver CD. The utility will give users flexibility on driver installation. It can be used for the following purposes.
  • Page 66 3. Once you made your selection, the ENJOY THE DIFFERENCE! screen will show up for 2 seconds, followed by a Setup window which automatically runs the installation. 4. Once the files are done copying make sure you reboot the system to insure that the files are updated correctly.

  • Page 67: Ezaudio

    ™ S UDIO OFTWARE PPLICATION Introduction ForteMedia's EzAudio™ is a software application developed for the PC music lover through CD, MIDI, and WaveTable features. EzAudio™ provides the overall application-driven capacity in music listening. EzAudio™ consists of Power ON/OFF controller, CD player, MIDI player, and Wave (digital sound)player and recorder.

  • Page 68: Activating Ezaudio

    4.2 Activating EzAudio™ The proper way to activate EzAudio™ is: 1. Double click the EZ Audio icon in the task bar. 2. You will then see the whole appearance of EzAudio™ . - 26 -...

  • Page 69: Ezaudio Recording

    EzAudio™ Component Description - Power ON/OFF Control This component manages and launches the other components. The "Power" button acts as a power switch, when clicked, the EzAudio™ application will close itself. EzAudio™ also support the application minimization, so you may shrink it to the bottom of your screen.

  • Page 70: Play Mixer

    4.5 PLAY MIXER - For volume control, click the MIXER button. The following Volume Control window will appear. - To adjust the Volume Control, or the applicable Wave/DS, FM-Syn, CD and Mic: - Move the corresponding Balance dial left and right - Move the corresponding Volume dial up and down - If mute is preferred on particular channel, click inside the corresponding Mute Box.

  • Page 71: Record Mixer

    4.6 RECORD MIXER - The recording mixer is inside MIXER component. To activate it, first press the MIXER button. - Then the Master Volume control panel will show up. Press the Option item in the above frame as indicated in the following. - From drawdown menu choose the properties icon.
  • Page 72 - From properties control panel, highlight the " Recording" icon in the "Adjust volume for" windows. Choose the input source then press " OK", The Record control screen should show up in the screen. - To record, the "Select Box" has to be checked for the recording channels selected. If one prefer to record the entire source at same time, then the "...

Table of Contents