Integrated Peripherals - Shuttle HOT-617 User Manual

Integrated Peripherals

IDE HDD Block Mode
This item is used to set IDE HDD Block Mode. If your IDE Hard Disk supports block
mode, then you can enable this function to speed up the HDD access time. If not, please
disable this function to avoid HDD access error.
IDE Primary/Secondary Master PIO
In these items, there are five modes defined in manual mode and one automatic mode.
There are 0, 1, 2, 3, 4, and AUTO. The default settings for on board Primary/Secondary
Master PIO timing is Auto.
IDE Primary/Secondary Slave PIO
In these items, there are five modes defined in manual mode and one automatic mode.
There are 0, 1, 2, 3, 4, and AUTO. The default settings for on board Primary/Secondary
Slave PIO timing is Auto.
On-Chip Primary PCI IDE
This item is used to defined on chip Primary PCI IDE controller is " Enable" or "Disable"
setting.
On-Chip Secondary PCI IDE
This item is used to defined on chip Secondary PCI IDE controller is " Enable" or
"Disable" setting.
PCI Slot IDE 2nd channel
This item is used to defined add-on PCI IDE secondary controller is " Enable" or
"Disable" setting.
User's Manual 28