Remote Device Management (Rdm) - Elation KL SPOT IP User Manual

Table of Contents

Advertisement

R E M O T E D E V I C E M A N A G E M E N T ( R D M )
NOTE: In order for RDM to work properly, RDM enabled equipment must be used
throughout the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data
standard for lighting, allowing the DMX systems of the fixtures to be modified and
monitored remotely. This protocol is ideal for instances in which a unit is installed in a
location that is not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled
controller to send out a signal to devices on the wire, as well as allowing the fixture to
respond (known as a GET command). The controller can then use its SET command to modify
settings that would typically have to be changed or viewed directly via the unit's display
screen, including the DMX Address, DMX Channel Mode, and Temperature Sensors.
FIXTURE RDM INFORMATION:
RDM Code
0x22A6
Please be aware that not all RDM devices support all RDM features, and therefore it
is important to check beforehand to ensure that the equipment that you are considering
includes all of the features that you require.
The following parameters are available on this device:
[0x0080] Device Model Description
[0x0081] Manufacturer Label
[0x0082] Device Label
[0x0070] Product Detail ID List
[0x00E0] DMX Personality
[0x00E1] DMX Personality Description
[0x0400] Device Hours
[0x0405] Device Power Cycles
[0x00C2] Boot Software Version Label
[0x00C1] Boot Software Version ID
[0x00A0] Language Capabilities
[0x00B0] Language
[0x0015] Comms Status
[0x0030] Status Messages
[0x0031] Status ID Description
Device
Device ID
Model ID
002A
42
[0x0032] Clear Status ID
[0x0120] Slot Information
[0x0121] Slot Description
[0x0122] Default Slot Value
[0x0200] Sensor Definition
[0x0201] Sensor Value
[0x0500] Display Invert
[0x0501] Display Level
[0x0603] Realtime Clock
[0x1010] Power State
[0x1031] Preset Playback
22
Personality ID
001 Standard
002 Extended
003 RGB
004 RGB Extended
005 CMY
006 CMY Extended

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kls445

Table of Contents