Gobo Dimensions - Elation KL SPOT IP User Manual

G O B O D I M E N S I O N S
Custom Gobos
Rotating Gobo Wheel Positions 1-5 &
Fixed Gobo Wheel Positions 1-7
Rotating Gobo Wheel Position 6
Gobo O.D. (Max. Outer Diameter)
Gobo I.D. (Max. Image Diameter)
Gobo Holder Diameter
Rotating Gobo Wheel Pos 6.
Please be aware of the intended position and correct sizing requirements of custom gobos.
Due to the high temperature optical system, special glass material is required for custom gobos,
and due to varying manufacturing processes and tolerances, it is highly recommended that a gobo
sample and holder from the fixture be provided to the custom gobo vendor for accurate sizing.
Extended testing of custom gobo designs is highly recommended prior to use. Contact ELATION
SERVICE for further information:
ELATION SERVICE USA -Monday -Friday 8:00am to 4:30pm PST
323-582-3322 | Fax 323-832-9142 | support@elationlighting.com
ELATION SERVICE EUROPE -Monday -Friday 08:30 to 17:00 CET
+31 45 546 85 63 | Fax +31 45 54685 96 | support@elationlighting.eu
KL SPOT IP ROTATING GLASS GOBOS WHEEL 1+2
Gobo Thickness
Gobo Thickness
Gobo Material
IMPORTANT NOTICE REGARDING CUSTOM GOBOS
Ø25.0mm
GOBO MAX I.D.
Ø29.9mm
GOBO MAX O.D.
Ø30.0mm
GOBO HOLDER
Ø25.0mm
GOBO MAX I.D.
Ø29.9mm
GOBO MAX O.D.
Ø30.0mm
GOBO HOLDER
ф29.9mm
ф25.0mm
ф30.0mm
Ø25.0mm
1.1mm
GOBO MAX I.D.
2.5mm
Ø29.9mm
High Temp Glass (Max 600C°)
GOBO MAX O.D.
Ø30.0mm
GOBO HOLDER
Ø25.0mm
GOBO MAX I.D.
Ø29.9mm
14
GOBO MAX O.D.
Ø1.1mm
THICKNESS
Ø1.1mm
THICKNESS
Ø2.5mm
THICKNESS
Ø2.5mm
THICKNESS