Elation KL SPOT IP User Manual page 20

I N S TA L L AT I O N G U I D E L I N E S
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating
working load limits, understanding the installation material being used, and periodic safety
inspection of all installation material and the fixture itself. If you lack these qualifications,
do not attempt to perform the installation yourself. Improper installation can result in bodily
injury.
FIXTURE INSTALLATION
The Elation KL SPOT IP is fully operational in three different mounting positions, hanging
upside-down, mounted sideways on trussing, or set on a flat level surface. Be sure this fixture
is kept at least 0.2m (7.9in.) away from any flammable materials (decoration etc.). Always use
and install the supplied safety cable as a safety measure to prevent accidental damage and/or
injury in the event the clamp fails. Never use the carrying handles for secondary attachment.
FALLING FIXTURES CAN CAUSE SEVERE INJURY OR SERIOUS EQUIPMENT
DAMAGE! FOR THIS REASON, FIXTURES SHOULD BE INSTALLED AND INSPECTED
ONLY BY QUALIFIED PERSONNEL. DO NOT INSTALL THE UNIT IF YOU LACK THE
QUALIFICATIONS TO DO SO, OR IF YOU HAVE DOUBTS ABOUT THE SAFETY AND
SECURITY OF THE INSTALLATION SETUP OR LOCATION!
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A
SUSPENDED ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT FALL IF THE
CLAMP FAILS.
20