Advertisement
Ethernet Configuration: "Network" Icon in the Board settings allows to access Ethernet configuration
menu
This option allows to configure the Ethernet settings; once they are done, tap the flag button, but changes
will only become effective at the next power ON. Tap the left arrow to go back.
The right arrow allows to access to DHCP settings:
If a DHCP Server is available, then the module can be enabled or disabled as DHCP client; tap Flag button
to save the new setting and go back to Main Menu: the DHCP server will automatically assign a new IP to
the module at next Power On. Tap the right arrow to go back without changes.
Channel settings
These settings are performed on individual channels:
(±) CH1 MENU ←
VMon
IMon
Status
VSet
ISet
Chan
(±) CH1 MENU ←
VTC
KT
T Step
T Ref
T Ext
Chan
15
<
Ethernet Menu
IP Address
192.168.0.250
Mask
255.255.255.000
Gateway
0.0.0.0
√
MAC Address
00.12.5e.00.07.07
DHCP
Enabled
√
(±) CH1 MENU ←
RampUp
RampDown
Trip
PowerDown
IMonRange
1/2
Chan
Dis/En
V/°C
3/3
CAEN
Electronic Instrumentation
2/3
803x Series 8-16 Ch. Programmable HV Power Supplies
>
>
Advertisement
