Advertisement
Purpose of this Manual
Change Document Record
Date
30 May 2019
20 December 2019
21 July 2020
28 January 2021
5 February 2021
25 February 2021
23 March 2021
7 May 2021
12 May 2021
8 June 2022
19 December 2022
Manufacturer Contacts
Limitation of Responsibility
If the warnings contained in this manual are not followed, CAEN will not be responsible for damage caused by improper
use of the device. The manufacturer declines all responsibility for damage resulting from failure to comply with the
instructions for use of the product. The equipment must be used as described in the user manual, with particular regard
to the intended use, using only accessories as specified by the manufacturer. No modification or repair can be performed.
Disclaimer
No part of this manual may be reproduced in any form or by any means, electronic, mechanical, recording, or otherwise,
without the prior written permission of CAEN spa. The information contained herein has been carefully checked and is
believed to be accurate; however, no responsibility is assumed for inaccuracies. CAEN spa reserves the right to modify
its products specifications without giving any notice; for up to date information please visit www.caen.it.
Made in Italy
We remark that all our boards have been designed and assembled in Italy. In a challenging environment where a
competitive edge is often obtained at the cost of lower wages and declining working conditions, we proudly acknowledge
that all those who participated in the production and distribution process of our devices were reasonably paid and
worked in a safe environment (this is true for the boards marked "MADE IN ITALY", while we cannot guarantee for third-
party manufactures).
This document is the 803x Series 8-16 Ch. Programmable HV Power Supplies User's Manual; it
contains information about the installation, the configuration and the use of the units.
Revision
Changes
0
Preliminary Release
1
Updated power requirements
2
Updated Technical specifications table
3
Updated power requirements, Technical specifications table
4
Updated Technical specifications table
5
Updated power requirements, Technical specifications table
6
Updated Technical specifications table
7
Updated Technical specifications table, External connections
8
Updated Software tools
9
Updated power requirements, Technical specifications table
10
Updated with 8034H series data
CAEN S.p.A.
Via Vetraia, 11 55049 Viareggio (LU) - ITALY
Tel. +39.0584.388.398 Fax +39.0584.388.959
www.caen.it | info@caen.it
© CAEN SpA – 2021
Advertisement
