Xblitz S7 DUO User Manual page 10

The included rear-view camera can be used as a reversing camera. When
properly connected, the image will automatically switch to the view from the
additional camera when reverse gear is engaged.
8. MENU OPTIONS
VIDEO MODE:
1. Night mode - allows you to enable or disable night mode recording.
2. Resolution - allows you to change the resolution of the recorded video files.
3. Loop recording - allows you to change the length of the recorded videos.
4. Exposure - allows us to set the exposure correction of the recorded image,
so we can avoid overexposure or underexposure.
5. Motion detection - allows you to enable or disable the mode in which the
camera starts recording video when motion is detected in front of it.
6. Audio recording - allows you to enable or disable audio recording by the
camera.
7. Date stamp - allows you to enable or disable the display of the date and
time on recorded videos.
8. G-sensor - allows you to set the sensitivity of the gravity sensor.
9. Parking mode - allows you to enable or disable parking mode.
PHOTO MODE:
1. Resolution - allows you to set the resolution of the images taken.
2. Quality - allows you to set the quality of the photos taken (the higher the
quality, the more memory the photos will occupy).
3. White balance - allows the camera parameters to be adjusted to the
prevailing light.
4. ISO - allows you to change the sensitivity of the camera sensor to light.
5. Exposure - allows us to set the exposure correction of the images taken, so
we can avoid over- or underexposure.
6. Quick view - allows you to enable a brief display of the captured images on
the camera screen.
7. Date stamp - allows you to enable or disable the display of the date and
time on captured images.
8. Delete - allows you to delete a single file or all files.
PLAYBACK MODE:
1. Delete - allows you to delete one or all recording files.
2. Secure - allows you to secure and unprotect one or all of your recording files.
GENERAL OPTIONS:
1. Date/time - date and time settings.
18
2. Screen saver - set the time after which the device's display goes blank.
3. Automatic switch-off - settings for the time after which the device will
automatically switch off while not recording.
4. System sounds - enable or disable menu navigation sounds.
5. WDR (Wide Dynamic Range) - thanks to this function, using appropriate
algorithms to analyse image exposure and dynamically change the value of
underexposed and overexposed pixels, the camera is able to make unde-
rexposed elements visible in the image and accurately record the scene
despite high contrast.
6. Language - selection of menu language.
7. Frequency - select the image refresh rate (50Hz or 60Hz) - 50Hz is the
recommended setting.
8. Format - format the micro SD card in the camera.
9. Version - the software version of the camera.
10. Default settings - restore the device to default settings.
9. PRECAUTIONS
1. Do not disassemble the camera yourself or interfere with its construction. In
the event of a malfunction, contact the service department.
2. Use only original accessories.
3. Only use the original charger supplied. The use of any other power supply
may adversely affect battery performance.
4. The device may not be used in contravention of the laws of your country
or region.
5. Permissible operating temperatures are 0-35 °C, storage: +5 to +45 °C,
humidity: 5-90 °C without condensation.
6. Do not subject the device to damage or impacts.
7. Take care of the cleanliness of the product, especially the lens. Do not use
detergents or chemicals when cleaning.
8. Clean only when the unit is unplugged.
9. Keep the device out of the reach of children.
10. Do not expose the device to very high temperatures or fire.
11. If you smell burnt plastic or electronics from the camera, unplug the unit as
soon as possible and contact service.
10. FAQ
1. Device does not switch on, screen flashes.
Before starting up, charge the unit's battery and check the connection in the
cigarette lighter socket.
2. The unit does not automatically switch on/off.
The reason for this behaviour may be the constant power supply in the
cigarette lighter socket.
19