Using The Timer; Wake-Up Timer - Pioneer XR-P270C Operating Instructions Manual

@ Prepare the desired component for playback.
TAPE WAL = TUNER/BAND
42
<ARE7108>
En
TIMER'
WAKE-UP \
TIMERY
WAKE-UP
USING THE TIMER
Wake-up timer
Before beginning
CD : Load a disc.
Tuner : Tune into the station you want to listen to. The
station selected during timer setting is
memorized.
Tape : Load acassette tape. (Playback starts from Tape I.)
@ Adjust volume level with the volume knob.
The volume level at the time of setting the timer is
memorized.
POWER
STANDBY/ON
Example : Setting to operate from 7:30 to 8:00 AM (set to switch
to an 82.50 MHz FM broadcast).
1. Switch on the power, and press the TUNER/BAND button.
(If you select a tape or CD on the main unit, play automatically
starts, so be sure to press the STOP button.)
2. Press the TIMER/WAKE-UP button.
If you have already set the timer, the previously set time is
displayed.
3. Set the time you want timer operation to start.
@ Set the hour — press the TIMER/WAKE-UP button.
@ Set the minute — press the TIMER/WAKE-UP button.
4. Set the time you want timer operation to stop.
@ Set the hour > press the TIMER/WAKE-UP button.
@ Set the minute > press the TIMER/WAKE-UP button.
5. Unit automatically confirms the setting mode.
6. Switch power off.
To cancel timer operation:
When the timer indicator (©) is lit, press the TIMER/WAKE-UP
button. (The timer indicator goes out.)
NOTES:
@ The wake-up timer and recording timer cannot be used together.
e /f you do not cancel the wake-up timer, it will operate everyday
at the set time.
e To change timer settings, or when you make a mistake while
performing settings, repeat the setting procedure from the
initial step.
e Pressing the TIMER/WAKE-UP button during timer operation
cancels timer operation.