Timer Playback - Pioneer DC-Z75 Operating Instructions Manual

A.S.E.S. {Auto Synchro Editing System)
8. Press ASES NORMAL button to start to LINK A.S.E.S.
* Begin LINK A.S.E.S
# With LINK A.S.E.S. if the CD playing time is shorter than the tape,
A.S.E.S. wilt finish in the REC PAUSE condition. If you wish to
continue and record a different CD, change CD and press the
ASES NORMAL button
In the following situation, ASES will finish in the STOP condition.
* If the CD playing time is longer than the tape.
¢ When CD is in the AUTO EJECT mode. (PD-275T)
[FINE]
1, Put disc in the CD player.
¢ With PD-Z85M, put CDs in trays 1 and 2
Put a tape to be recorded in Deck I.
Set DOLBY NR switch to the desired position.
4. To record the sound passed through the graphic equalizer, turn
on SOUND CONTROL ON/OFF button and adjust the sound quality.
5. Perform COMPU EDIT with the CD player for the selected tape
length.
© Please refer to the operating instructions of your CD player
6. Press the ASES FINE button,
aN
«< A.S.E.S operation >
(1) The cassette tape for recording is rewound to the beginning
(3) Recording on the cassette tape begins in the forward direction.
(3) Playback begins on the CD player.
(4) When one side is recorded, recording on the cassette tape begins
in the reverse direction.
button (pm),
NOTE:
near the end of the tape. In such cases use manual operation to record
the remaining songs:
| TIMER PLAYBACK
i' SLEEP TIMER me Automatically tums off power. |
Steep timer can be activated by remote contro! unit only. Power is turned
off automatically after your set time has elapsed.
Each time you press the SLEEP button, the setting changes in the
sequence shown here
Unit: min
in the AUTO SLEEP mode, power to the unit is automatically switched
off at the end of recording.
r
21
<ARB1349>