Program Play; Recording During Program Play - Pioneer XR-P270C Operating Instructions Manual

COPLAYPAUSE
TAPE-PLAYIONR
—
. Press twice. vie Press twice.
) Presione dos veces. (@) Presione dos veces.
NN ee duas veres. \ ors duas vezes.
= ionY
36
<ARE7108>
En
CONVENIENT CD FUNCTIONS
| Program play
e@ Operate by remote control.
@You can program up to 32 steps.
Example : Programing the fifth track on the first disc for the first
step, and the eighth track on the second disc for the
second step.
1. When in the Stop mode, press the PGM button.
2. Press DISC select button 1, then select the fifth track with
the 4 track search button. :
3. Press the PGM button.
4. Press DISC select button 2, then select the eighth track with
the & track search button.
5. Press the PGM button.
6. Press the Play/Pause button.
Play starts in the programed order.
7. To stop program play, press the STOP button.
To cancel program play:
During play : press the STOP button twice.
When in the Stop mode: press the STOP button once.
Press the OPEN/CLOSE button.
Canceling program play
When in the Stop mode, press the CLEAR button.
Each time you press the button, program steps are canceled in
order starting from the last step.
Recording during program play
1. Procedures 1 to 5 are the same as those on page 28.
2. Press the PGM button.
Follow the procedures for programing in the "Program play"
on this page.
3. Press the CD-PLAY/PAUSE button twice.
Pauses the CD play.
4. Press the REC START/STOP button.
Recording starts.
The lit arrow mark in the display indicates the direction the
tape is recording in.
5. Press the CD-PLAY/PAUSE button.
CD play starts.
6. To stop recording, press the REC START/STOP button or the
STOP button on the remote control unit.