Control Panel - Supermicro Storage SuperServer SSG-640SP-DE1CR60 User Manual

Control Panel

Feature Description
The main power button is used to apply or remove power from the power supply to the server.
Power button Turning off system power with this button removes the main power but maintains standby
power. To perform many maintenance tasks, you must also unplug system before servicing.
NIC LED Indicates network activity on LAN port when flashing.
Information LED Alerts operator to several states, as noted in the table below.
The Unit ID (UID) button is used to turn on or off the blue UID LED to easily locate the server
in racks and server banks. Solid blue indicates the UID has been activated locally to locate
UID Button/LED
the server in a rack environment. Blinking blue indicates the UID has been activated using
BMC to locate the server in a rack environment.
Status
Continuously on and
red
Blinking red (1Hz)
Blinking red (0.25Hz)
Figure 1-2. Control Panel (per Node)
Control Panel Features (per Node)
Information LED
Description
1. An overheat condition has occurred.
2. An HDD(s) status has changed. (For details,
please refer to the
section).
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power
supply.
12
Chapter 1: Introduction
Power
NIC LED
Information LED
UID Button
Hard Drive Carrier Indicators