2-3. Adjusting Mode
●
To select the display mode (CAL Switch mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode
1-DICOM
2-CAL1
3-CAL2
4-Hybrid-γ
Procedure
1. Press
.
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
Note
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
●
Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)
√: Adjustable -: Not adjustable
Icon
Brightness
GrayArea
BaseArea
HybridAssignment
HighlightArea
ModeReset
AvailabletodisplayinDICOMmode.
Displaysthescreenadjustedbycalibrationsoftware.
Automaticallyidentifiesthedisplayareaforthemedicalandotherimagesonthesame
screen,anddisplayseachsetstatus.
Themodemenu
appears.
or
while the mode menu is displayed.
→ 1-DICOM←→2-CAL1←→3-CAL2←→4-Hybrid-γ←
Function
Purpose
is pressed.
CAL Switch mode
2-CAL1
1-DICOM
3-CAL2
√
-
-
-
-
√
4-Hybrid-γ
√
-
-
√
-
√
-
√
-
√
√
√
Chapter2AdjustingScreens
11