Table of Contents
Advertisement
USING SETUP MODE
5-62
4. Exit the HEX-DUMP function.
Exit the HEX-DUMP function in either of the following ways:
To remain in setup mode, press the LF/FF button. The
<<FUNCTION>> menu is then reprinted. For details on
other functions, see other sections in this chapter.
To return to online normal mode, press the ONLINE button.
If you press the ONLINE button while the hex dump is
printing, the printer immediately switches to normal online
mode, but data that was sent to the printer is printed.
You can also enter hex dump mode, by turning off the printer, and then
turning the printer back on while simultaneously pressing the ONLINE
button and the LF/FF button until the printer beeps.
Sample hex dump
User's Manual
Advertisement
Table of Contents
