Table of Contents
Advertisement
USING SETUP MODE
5-54
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG
Options
Items
<CSF-LD>
NORMAL
SWBACK
<CSFAPTC>
NORMAL
ALWAYS
<LF-CTL>
PRCISIN
SPEED
<PR-MODE>
NORMAL
HISPEED
QUIET
Description
Selection of the method of feeding from
the CSF
Feeds paper directly from the CSF
hopper.
Feeds paper from the CSF hopper to
either the paper table cut sheet table used
with a front CSF or the stacker used with
a rear CSF. Then, that paper is fed
again.
Paper thickness detection with use of a
CSF
Sheet of paper that is fed immediately
after the feed bin is switched.
Detect the paper thickness at 1st page
when printing from Cut sheet feeder
continuously.
Detect the paper thickness of every
paper when printing from Cut sheet
feeder.
Selection for LF mode
Precision is the first priority.
Speed is the first priority.
Selection for print mode
(standard/ hi speed /low noise)
Prints in standard mode.
Prints in hi-speed mode.
Prints in low-noise mode.
User's Manual
Advertisement
Table of Contents
