Fujitsu DL7400Pro User Manual page 32

SETTING UP
2-6
2
Close the paper table.
Lower the paper table as shown in the figure below (1), then push
(2) and close (3) the cover.
The complete setup conditions are shown below. Make sure that the top
end of the paper table is engaged with the printer guide pin and the guide
pin on the paper table is inserted into the cover groove.
Cover groove.
Guide pin (metal stud)
NOTE
Do not apply unreasonable force while you are handling the paper
table. It could cause damage. Also, do not leave the paper table in
incomplete setting. Running the printer with the paper table left in
incomplete conditions could cause a paper jam.
(1)
(3)
(2)
(2)
(3)
(1)
Paper table guide pin
User's Manual