Table of Contents
Advertisement
Fluidmesh 1200 VOLO
2.
Connect a computer to the Fluidmesh device.
3.
Launch the offline Configurator interface.
4.
Switch to Online Cloud-Managed mode as shown in the
Switching between offline and online modes section of your
device's Installation and Configuration manual.
5.
Adjust the device configuration as needed using the Fluidmesh
Partners Portal.
© 2020 Cisco and/or its affiliates. All rights reserved.
NOTE
As of October 2018, the most current firmware
versions are as follows:
• 1.2.1 (FM 1000 and FM 10000 gateways)
• 7.5.1 (FM 1200 VOLO)
• 8.2.1 (All FM x200 variants)
• 9.0.1 (All FM x500 variants)
Page 150 of 169
Advertisement
Table of Contents
