Table of Contents
Advertisement
Fluidmesh 1200 VOLO
Environmental rating
The unit is certified for outdoor usage, equipped with vibration-proof
connectors, and designed for fast installation and enhanced reliability in
harsh environments.
Staging hardware
A staging kit that allows easy installation of the unit on walls and utility
poles is supplied as part of the complete package.
Product specifications
For detailed product specifications, refer to the product data sheet for the
Fluidmesh 1200 VOLO.
Transceiver and gateway unit power consumption
In service, Fluidmesh transceiver units and gateway units consume
electrical power at the rates given in the table below.
Table 1. Power consumption figures (transceiver units)
Unit series
FM PONTE
50
FM 1200
VOLO
FM 1300
OTTO
FM 3200-
series
FM 4200-
series
© 2020 Cisco and/or its affiliates. All rights reserved.
IMPORTANT
In service, transceiver and gateway units will consume power
at various levels between the quoted lower limit and upper
limit, depending on data traffic load, signal strength,
environmental conditions such as line-of-sight and atmospheric
moisture, and other factors.
Note that the power consumption of transceiver units tends to
be affected in inverse proportion to the unit temperature (in
other words, power consumption tends to rise when the
temperature of the unit falls, and the other way around).
Minimum power
consumption
consumption (typical
4 Watts
6 to 7 Watts
4 Watts
6 to 7 Watts
8 Watts
10 to 12 Watts
4 Watts
6 to 7 Watts
4 Watts
6 to 7 Watts
Nominal power
Maximum power
conditions)
(realistic system-
10 Watts
10 Watts
15 Watts
10 Watts
10 Watts
consumption
design
assumption)
Page 12 of 169
Advertisement
Table of Contents
