Table of Contents
Advertisement
Fluidmesh 1200 VOLO
the *.CSV file, then click the Export selected button.
Alternatively, export all Activation codes by clicking the Export
All button
Figure 79. Plug-ins web page (code export controls)
5.
Follow the software prompts to download the exported *.CSV file
to your computer. Save the file in a safe place.
6.
On the configurator interface, click the -manage plug-ins link
under MANAGEMENT SETTINGS in the left-hand settings menu.
• The MANAGE PLUG-INS dialog will be shown.
7.
Upload the *.CSV file to the unit by clicking the Choose File
button in the Upload Plug-ins CSV section
145)) and following the software prompts.
Figure 80. MANAGE PLUG-INS DIALOG (Upload Plug-ins
CSV section)
• The chosen *.CSV file will be listed to the right of the
8.
Click the Upload button.
• The plug-ins will be uploaded to the unit and activated, and
© 2020 Cisco and/or its affiliates. All rights reserved.
(Figure 79 (page
IMPORTANT
If all Activation codes are exported, only the
Activation codes that are linked to the unit
identification number (5.a.b.c), or the unit serial
number of the target unit, will be assigned to the unit.
All codes that are not relevant to the unit will remain
unused.
Choose File button.
the relevant functionality can be used.
145)).
(Figure 80 (page
Page 145 of 169
Advertisement
Table of Contents
