Spillage-Free Frame; Storage; Options - Atlas Copco XAS 98 Kd WUX Instruction Manual

SPILLAGE-FREE FRAME

(1)
The compressor is fitted with a leak-proof
undercarriage in order to protect the environment.
Any leaking fluid is collected in case of malfunctions.
This fluid can be removed via a drain (1), normally
secured by caps.
Tighten the cap firmly and check for leakages.
Please observe the locally applicable environmental
regulations when removing the leaked liquid.

STORAGE

Run the compressor regularly, e.g. twice a week, until
warm.
Load and unload the compressor a few times to
operate the unloading and regulating components.
Close the air outlet valves after stopping.
If the compressor is going to be stored
without running regularly, protective
measures must be taken.
Contact Atlas Copco
measures.
- 36 -

OPTIONS

Multi-approved vessel
Standard the machine comes with a CE approved
vessel. The multi approved vessel includes ASME,
CRN, MOM, AS1210 and ML approval.
Additional fuel filter
When bad fuel quality is a risk, an additional fuel
filter with water separator is recommended.
for correct
Safety cartridge
In case of highly polluted / dusty environments a
safety cartridge is recommended. This gives extra
protection in case of a rupture in the filter element.
Toolbox
A toolbox is located inside the bodywork above the
battery and can be easily removed to access the
battery below if required.
Non-return valve
A non-return valve can be installed between vessel
and air outlet valves to prevent air of flowing back to
the vessel when using pressurized equipment.
Cold weather equipment
With cold weather equipment we guarantee starting
down to -20°C.