J. A. Roby ULTF Instruction Manual page 14

7- Insert the 2 other pipes in the stove by putting them through the hook of the pipe stand.
8- Insert the 4 bricks on the pipes (4 x bricks R) and the wool, then put the steel plate over the
wool.
***IMPORTANT*** Make sure that the wool don't obstruct the remaining space
between the deflector and the wool. (See figure 3)
9- Install the last pipes (It is the one located higher than the others)
PR_I019/2020-11-16-EN Revision: 5
FIGURE 3
14