Filter Replacement - J. A. Roby ULTF Instruction Manual

Filter replacement when the clearance in the back of the appliance doesn't allow to remove
the filter directly
1. Remove the 11 screws (A)
then the side panel.
2. Remove the filter to be
replaced.
3. Put a new filter in.
4. Replace the side panel with
the filter and screw
everything back.
5. Repeat the previous steps
for the second panel on the
other side.
Filter replacement if the clearance allows
1. Take out the removable
panel (A) and the filter to
be replace.
2. Insert the replacement
filters.
PR_I019/2020-11-16-EN

FILTER REPLACEMENT

Revision: 5
FIGURE 18
FIGURE 19
24