Accessories; Graco-Approved Hydraulic Fluid; Technical Data - Graco Viscount I Instructions And Parts

Hydraulic motor
Hide thumbs Also See for Viscount I:
Table of Contents

Advertisement

Accessories

Accessories
NOTE:
Use Only Genuine Graco Parts and Accesso-
ries.

Graco-Approved Hydraulic Fluid

Premium, ISO Grade 46 petroleum-based hydraulic oil
containing rust and oxidation exhibitors and anti-wear
agents. 210° F (99° C) Flash Point.
Parts
Description
169236 5 gallon (20 liter)
207428 1 gallon (3.8 liter)

Technical Data

Maximum hydraulic fluid input pressure. . . . . . . . . . . . . . 1,500 psi (10 MPa, 102 bar)
Maximum hydraulic fluid input volume . . . . . . . . . . . . . . . 3 gpm (11.3 liter/min)
Fluid consumption rate. . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 ounces (0.195 liter) per cycle or 1 gallon per 19.5
Minimum operating temperature . . . . . . . . . . . . . . . . . . . 40° F (4° C)
Maximum water content of hydraulic fluid . . . . . . . . . . . . 1 percent
Maximum fluid temperature . . . . . . . . . . . . . . . . . . . . . . . 130° F (54° C)
Effective piston area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.48 sq in. (9.55 cm
Piston rod diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3/8 in. (34.9 mm)
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 in. (101.6 mm)
Thrust at 1,500 psi (10 MPa, 102 bar) . . . . . . . . . . . . . . . 2,220 lb (9,875 N)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.5 lb (7.93 Kg)
®
Loctite
is a registered trademark of the Loctite Corporation.
®
Perma-Loc
and Perma-Bond
14
®
are registered trademarks of Perma-Loc Company.
cycles
2
)
312484B

Advertisement

Table of Contents
loading

This manual is also suitable for:

255345

Table of Contents