Sony ILCE-9 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Digital Camera
  5. ILCE-9
  6. Service manual

Sony ILCE-9 Service Manual

Interchangeable lens digital camera
Hide thumbs Also See for ILCE-9:
Table of Contents

Advertisement

Quick Links

2018/04/18 01:20:10 (GMT+09:00)
SERVICE MANUAL
Ver. 1.2 2018.04
LEVEL 2
Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus affected unit was found during
service, contact your Service Headquarters.
9-896-817-33
2018D33-1
©
Sony Imaging Products & Solutions Inc.
2018.04
INTERCHANGEABLE LENS DIGITAL CAMERA
ILCE-9
US Model
Canadian Model
AEP Model
UK Model
Russian Model
E Model
Indian Model
Chinese Model
Korea Model
Tourist Model
SYS SET

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ILCE-9 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sony ILCE-9

Summary of Contents for Sony ILCE-9

  • Page 1 Tourist Model In case a virus affected unit was found during service, contact your Service Headquarters. INTERCHANGEABLE LENS DIGITAL CAMERA 9-896-817-33 2018D33-1 © Sony Imaging Products & Solutions Inc. 2018.04 SYS SET...

  • Page 2: Specifications

    File format [System] 1 200-zone evaluative metering JPEG (DCF Ver. 2.0, Exif Ver. 2.31, MPF PRINT Image Matching III Compatible Baseline) compliant, RAW (Sony ARW Camera Type Metering Range 2.3 format) Interchangeable Lens Digital Camera –3 EV to +20 EV (at ISO 100 equivalent Dimensions Approx.

  • Page 3: Exterior Parts

    CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.

  • Page 4: Service Note

    2018/04/18 01:20:10 (GMT+09:00) ILCE-9 1. SERVICE NOTE 1-1. PRECAUTION ON REPLACING THE Update of MAC Address and Device Address SY-1081 BOARD When a board that contains Wi-Fi and Bluetooth has been replaced or when replacing a board that contains the main IC (CPU), the IC’s unique number (MAC address and device address) must be reloaded.
  • Page 5 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 1-2. PRECAUTION FOR REPLACEMENT 1-4. CHECKING THE Wi-Fi FUNCTION OF THE MECHA DEVICE SERVICE Perform the following procedure to check the Wi-Fi function. (IMAGER) Required equipment: Windows personal computer with Wi-Fi Capture the data to PC from CD-ROM supplied with the mecha interface device service when it is ordered.

  • Page 6: Disassembly And Assembly

    2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2. DISASSEMBLY & ASSEMBLY OPERATION NOTES Make sure that the conductive side of a flexible board does not have any stain or foreign materials. Do not touch the conductive side of flexible boards with bare hands.
  • Page 7 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-1. CONSTITUTION DIAGRAM rear cover block SY heat sink assy LCD panel block VF block top cover block jack base (rear) block FP-2376 flexible board SY-1081 board block SY main frame block BT block anti shake unit MB charge unit...
  • Page 8 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-2. DISASSEMBLY • Disassembled in the order shown in the fl owchart below. 2-2-1. DISASSEMBLY FLOW MAIN UNIT 2-2-2. FRONT GRIP RUBBER (Page 2-4) 2-2-3. BOTTOM COVER (Page 2-4) 2-2-4. REAR COVER BLOCK (Page 2-5) 2-2-10. GY-1008 BOARD 2-2-6.
  • Page 9 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 Note: Disassemble in the order indicated by the numbers assigned to the parts in the fi gures such as 1. 2-2-2. FRONT GRIP RUBBER top side front side 4 NFC performance sheet 2 adhesive sheets 3 NFC performance...

  • Page 10: Rear Cover Block

    2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-4. REAR COVER BLOCK 4 four screws (M1.7 2 screw (BTITE (1.4 5 (CH))) 6 screw (M1.7 2.5) 5 Open the LCD panel. 7 Open three lids. 3 CV diopter adjust dial rear side 1 eye cup assy 8 three screws (M1.7...
  • Page 11 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-5. LCD PANEL BLOCK 6 LCD panel block 4 two screws (P2 M1.7 2.5) top side 4 two screws (P2 M1.7 2.5) 5 Draw the LC-1035 flexible board out of the hole. front side LC drop cushion – Front view –...
  • Page 12 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-7. BOTTOM FRAME BLOCK rear side 1 screw (M1.7 2.5) bottom side 3 bottom frame block 2 Lift up the bottom frame block in the direction of the arrow. 2-2-8. VF BLOCK 4 VF block 2 EVF flexible board...

  • Page 13: Top Cover Block

    2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-9. TOP COVER BLOCK 3 two screws (M1.7 – Rear view – 3 screw (M1.7 3 screw (M1.7 2 SH-1018 flexible board 1 RL-1049 flexible board 7 top cover block top side 6 two screws (M1.7 2.5) rear side 4 Open the battery lid.
  • Page 14 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-2-10. GY-1008 BOARD 1 screw (M1.7 3 boss 4 hook 2 screw (M1.7 2.5) 7 GY-1008 board block 5 Lift up the GY-1008 board block. 3 boss rear side – Bottom view – bottom side 6 RL-1049 flexible board...
  • Page 15 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-2-11. CNT DIAL (R) ASSY 8 CNT dial (R) assy 6 protection SP cushion 5 CNT dial (R) block top side 1 screw (M1.7 2 dial (R) hold plate 7 drop protection R sheet 6 protection SP cushion 3 Turn over the flexible board.
  • Page 16 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-2-13. RL BLOCK-1 • Continued on 2-2-14 (page 2-12). 1 Turn the switch to "OFF". 2 hook 4 screw (M1.7 2.5) 6 three screws (M1.7 2.5) Note 1: Do not touch this part. 3 screw (M1.7...
  • Page 17 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-2-14. RL BLOCK-2 1 two screws (M1.7 2 screw (M1.7 3 eyelet plate (G) 5 eyelet (G) assy 4 boss bottom side – Bottom view – rear side 9 control switch block (RL79900) Note: Do not touch this part.
  • Page 18 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-2-15. MD DIAL ASSY, CONTROL SWITCH BLOCK (EV79900) 1 two tapping screws (1.7 4) (CH) 3 two screws (M1.7 2.5) rear side bottom side 4 Draw the flexible board out of the hole. Note: Take care not to damage the flexible board.
  • Page 19 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-2-16. TOP L JOINT PLATE ASSY, 2 STEP DIAL ASSY – Bottom view – 3 boss 1 tape AS (9 14 mm) 2 two screws (0+Z M1.7 4 SG (SPIN)) 6 three screws (M1.7 bottom side...
  • Page 20 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-2-17. EVF PROTECTOR 1 two screws (M1.7 bottom side 2 boss 3 hook front side 7 two tapping screws (1.7 4) (CH) 4 adhesive tape 5 boss 6 hook qs EVF protector 0 boss 9 adhesive tape qa Draw the flexible board out of the hole.
  • Page 21 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-2-18. SH FPC BASE BLOCK 4 two screws (M1.7 3 two screws (M1.7 2.5) 5 SH FPC base block 1 SH protection sheet (A) bottom side rear side 2 MIS-2003 flexible board 2-2-19. SH-1018 FLEXIBLE BOARD...
  • Page 22 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-2-20. MIS-2003 FLEXIBLE BOARD 2 four screws (M1.7 bottom side 1 shoe cap rear side 5 shoe base B-assy 3 Draw the flexible board out of the hole. Note: Take care not to damage the flexible board.
  • Page 23 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-21. SY HEAT SINK ASSY 1 three screws (M1.7 2.5) 2 SY heat sink assy rear side bottom side 2-2-22. FP-2376 FLEXIBLE BOARD 1 two screws (M1.7 2.5) 3 FP-2376 flexible board 2 Lift up the FP-2376 flexible board.
  • Page 24 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-23. SY-1081 BOARD BLOCK 0 screw (M1.7 2.5) 8 terminal unit connector 0 screw (M1.7 2.5) 9 LN-2000 flexible board rear side 7 speaker connector SY-1081 board rear side bottom side 6 TEX-5300 qa MB charge unit flexible board...
  • Page 25 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-24. SY MAIN FRAME BLOCK 2 FP protection sheet (C) 3 four screws (M1.7 6 SY main frame block 4 Lift up the SY main frame block. 5 Draw the two flexible boards out of the hole. Note: Take care not to damage rear side the flexible board.
  • Page 26 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-26. IM IMAGER BLOCK, TEX-5300 1 two AS graphite sheets IMG 2 Remove the ISL-2007 flexible board from two bosses. 3 Remove the ISP-2006 flexible board from two bosses. rear side ISP-2006 flexible board top side ISL-2007 flexible board 4 three IM imager fix shafts (M1.7...
  • Page 27 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-27. SHUTTER BLOCK 1 three screws (M1.7 5 shutter block 2 MB jack shield block 3 Lift up the shutter block in the direction rear side of the arrow. top side 4 Remove the shutter block in the direction of the arrow.
  • Page 28 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-29. MB N FRAME BLOCK top side 2 MB N frame block rear side 1 four screws (P2 new truster M2 2-2-30. LOUDSPEAKER (1.0 cm) BLOCK top side 3 speaker plate block 2 screw (M1.7 4 loudspeaker 1 tape AS (2040) (1.0 cm) block...
  • Page 29 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-31. JACK BASE (FRONT) BLOCK top side 3 jack base (front) block 2 LN shield plate block 1 two screws (M1.7 rear side 2-2-32. NFC BASE BLOCK top side 2 Remove the NFC base block in the direction of the arrow.
  • Page 30 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-33. BT BLOCK top side 6 screw (M1.7 – Top view – DL-1004 flexible board 5 hook 5 hook 2 VG-1005 1 FP protection flexible board sheet (C) front side 4 two bosses 9 two tapping screws (1.7...
  • Page 31 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-34. MB N PLATE A, MB N PLATE SP 1 three screws (0+P1 M2 6) (SPIN) 1 three screws (0+P1 M2 6) (SPIN) 2 MB N plate A 3 MB N plate SP front side bottom side 2-2-35. MB LL BUTTON BLOCK...
  • Page 32 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-2-36. CONTACT BLOCK 4 two screws (M1.7 Note 1: Do not touch the contact portion. MB N contact unit MB F prevention sheet 6 contact block Note 1: Do not touch the contact portion. 5 Draw the flexible board out of the hole A and B.
  • Page 33 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3. ASSEMBLY • Assemble in the order shown in the fl owchart below. Note: If there are torque values indicated for screws in the assembly fi gures, tighten the 2-3-1. ASSEMBLY FLOW screws according to those torque values.
  • Page 34 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Note: Assemble in the order indicated by the numbers assigned to the parts in the fi gures such as 1. 2-3-2. MB N CONTACT UNIT 1 MB N contact unit 2 MB F prevention sheet Note 1: Do not touch the contact portion.
  • Page 35 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-4. MB LL BUTTON 3 MB LL button 4 MB LL pin 5 MB LL button block 2 MB lens lock spring 1 Apply grease G-85 front side bottom side 2-3-5. MB N PLATE SP – Rear view –...
  • Page 36 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-6. MB N PLATE A marking position 1 MB N plate A 2 MB LL pin front side bottom side 3 screw 5 screw (0+P1 M2 6) (SPIN) (0+P1 M2 6) (SPIN) 8 screw 7 screw (0+P1 M2...
  • Page 37 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-7. BT BLOCK top side front cover block 4 boss coaxial cable (110 mm) setting hole 2 Insert the DL-1004 flexible board and into the hole. Note: Take care not to damage the flexible board. 3 Install the BT block in the direction of the arrow.
  • Page 38 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-8. NFC BASE BLOCK cable setting top side NFC base NFC cable – Inner view – cable setting 1 NFC base block BT block NFC cable 3 two screws NFC base (M1.7 2.5) rear side connector 2 connector –...
  • Page 39 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-10. LOUDSPEAKER (1.0 cm) BLOCK top side 2 speaker plate block 3 screw (M1.7 1 loudspeaker 4 tape AS (2040) (1.0 cm) block 14 mm) loudspeaker (1.0 cm) : guide line rear side [black] [red] tape AS (2040)
  • Page 40 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-12. MB CHARGE UNIT Hold here. shutter unit (AFE-3379) Hold here. MB charge unit – Rear view – – Rear view – Hold here. Do not touch this part. Do not touch this part. top side 2 MB charge unit...
  • Page 41 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-14. IM IMAGER BLOCK 3 Insert two pins (Ø 1.22 ± 0.01) into holes. Note 1: When install the spacer sheet to the imager and the optical filter block, install them so that the each centers are matched and top and bottom right and left become uniform.
  • Page 42 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-15. ANTI SHAKE UNIT tape AS (2040) tape AS (2040) – Rear view – – Top view – 14 mm) AS graphite sheet top : guide line : guide line turn down 4 AS graphite sheet top 6 tape AS (2040)
  • Page 43 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-16. SY MAIN FRAME BLOCK 5 FP protection sheet (C) 4 four screws (M1.7 : guide line FP protection sheet (C) 1 SY main frame block turn down 3 Install the SY main frame block. Note 2: Take care so that the flexible –...
  • Page 44 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-18. SY-1081 BOARD BLOCK 2 SY-1081 board block 6 Insert the three flexible boards into the hole of the SY-1081 board block. Note 1: Take care not to damage 7 Install the SY-1081 board block the flexible board.
  • Page 45 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-19. FP-2376 FLEXIBLE BOARD 3 two screws (M1.7 2.5) 1 FP-2376 flexible board 2 boss 2 boss rear side 2-3-20. SY HEAT SINK ASSY 3 three screws (M1.7 2.5) 1 SY heat sink assy 2 boss rear side...
  • Page 46 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-21. MIS-2003 FLEXIBLE BOARD 6 four screws (M1.7 bottom side 5 Apply the adhesive bond (B-40) to four screws (M1.7 B-40 B-40 Including coating area lower side. Note 2: Confirm that the adhesive bond does not protrude.
  • Page 47 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-22. SH-1018 FLEXIBLE BOARD – – : guide line 1 SH-1018 flexible board 2 tape AS 3 SY radiation sheet SH 14 mm) 0 to 1.0 mm 0 to 1.0 mm 0 to 1.0 mm –...
  • Page 48 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-23. SH FPC BASE BLOCK 3 two screws (M1.7 4 two screws (M1.7 2.5) 1 SH FPC base block 2 boss 2 boss bottom side rear side SH-1018 flexible board MIS-2003 flexible board – Bottom view –...
  • Page 49 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-24. EVF PROTECTOR 1 EVF protector 3 boss 4 adhesive tape 2 Insert the flexible board into the hole. Note: Take care not to damage the flexible board. : guide line 5 Install the EVF protector in the direction of the arrow.
  • Page 50 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-25. 2 STEP DIAL ASSY, TOP L JOINT PLATE ASSY 5 top L joint plate assy 6 three hooks 2 two tapping screws (1.7 4) (CH) 7 Arrange the flexible board. 4 AFMF lock spring 3 AM dial lock button...
  • Page 51 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-26. CONTROL SWITCH BLOCK (EV79900), MD DIAL ASSY 7 two tapping screws (1.7 4) (CH) 4 two screws (M1.7 2.5) rear side bottom side 3 Insert the flexible board into the hole. Note: Take care not to damage the flexible board.
  • Page 52 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-27. RL FPC BASE BLOCK, MD SWITCH HOLDER 1 Refer to “2-6. FLEXIBLE BOARD SETTING” and bend the RL-1049 flexible board. : guide line 7 adhesive tape 7 adhesive tape 4 rib 0 to 0.5 mm 0 to 0.5 mm...
  • Page 53 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-28. RL BLOCK-1 • Continued on 2-3-29 (page 2-49). 1 control switch block (RL79900) Note: Do not touch this part. RL block 2 three solders 6 screw (M1.7 2.5) 6 two screws (M1.7 2.5) hole 5 Align three holes with three...
  • Page 54 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-29. RL BLOCK-2 Note 1: Do not touch this part. Note 2: Take care not to damage the flexible board. 0 hook 9 boss 7 screw (M1.7 2.5) Note 1: Do not touch this part. 5 three screws (M1.7 2.5)
  • Page 55 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-30. CONTROL DIAL (F) ASSY – Right view – 5 two screws (M1.7 2.5) boss 4 Install the boss hole hole boss boss hole hole – Bottom view – 2-50 SYS SET...
  • Page 56 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-31. CNT DIAL (R) ASSY – Rear view – – Right view – – Left view – boss boss – Bottom view – Note: Take care so that the flexible board is not pinched. 5 boss 9 screw (M1.7...
  • Page 57 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-32. GY-1008 BOARD 9 screw (M1.7 8 screw (M1.7 2.5) 7 boss Note: Arrange the RL-1049 flexible board inside the rib. 7 boss – Bottom view – 2-52 SYS SET...
  • Page 58 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-33. TOP COVER BLOCK 1 top cover block top side 2 two screws (M1.7 2.5) (0.12 ± 0.02 rear side 3 Open the battery lid. 4 screw (M1.7 (0.12 ± 0.02 5 two screws (M1.7 – Rear view –...
  • Page 59 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-34. VF BLOCK 1 VF block 3 EVF flexible board 4 ES-1003 flexible board rear side 2 two hooks bottom side 2-3-35. BOTTOM FRAME BLOCK rear side 2 convex portion 2 convex 1 bottom frame block portion bottom side 3 screw (M1.7...
  • Page 60 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-36. JACK BASE (REAR) BLOCK 3 Attach the jack base (rear) block in the direction of the arrow. 1 jack base (rear) block rear side : guide line 2 Insert the jack base (rear) block in the direction of the arrow.
  • Page 61 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-38. REAR COVER BLOCK 1 rear cover block rear side 5 Install the rear cover block in the direction of the arrow. 3 UH lid 2 JK lid 4 RS-1009 flexible board top side rear side 7 Open the media lid.

  • Page 62: Bottom Cover

    2018/04/18 01:20:10 (GMT+09:00) ILCE-9 2-3-39. BOTTOM COVER 2 eight screws (M1.7 1 bottom cover bottom side front side 2-57 SYS SET...
  • Page 63 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-3-40. FRONT GRIP RUBBER Note 1: Be careful not to cover the red frame area. : guide line grip adhesive 5 grip adhesive – Front view – – Left view – – – grip adhesive grip adhesive...
  • Page 64 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-4. TORQUE VALUE OF OTHER SCREWS Tighten screws while referring to the torque values below for screws not indicated in “2-3. ASSEMBLY”. three screws (M1.7 2.5) rear button plate screw (M1.7 2.5) four screws (M1.7 2.5) rear plate two screws (M1.7...
  • Page 65 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-5. PASTING POSITION OF OTHER PARTS Work while referring to the information below for pasting position not indicated in “2-3. ASSEMBLY”. : guide line – – – – speaker adhesive sheet 0 to 1.0 mm Note: Be careful not to cover RS-1009 flexible board the red frame area.
  • Page 66 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 : guide line – – 0 to 0.5 mm 0 to 1.0 mm NFC antenna gyro cushion 0 to 0.5 mm 0 to 1.0 mm screwdriver (Ø1.6) – – screwdriver (Ø1.6) light shield sheet (A) light shield sheet (A)
  • Page 67 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 2-6. FLEXIBLE BOARD SETTING : Mountain fold : Valley fold [red] cable [black] 2-62E SYS SET...

  • Page 68: Exploded Views

    2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 3. EXPLODED VIEWS Note: The components identified by mark 0 or dotted line with • -XX and -X mean standardized parts, so they may have some dif- mark are critical for safety. ference from the original one.

  • Page 69: Rear Cover Section

    2018/04/18 01:20:10 (GMT+09:00) ILCE-9 3-2. REAR COVER SECTION Ver. 1.2 not supplied 81 80 rear side supplied front side Refer to panel module section. Ref. No. Part No. Description Ref. No. Part No. Description A-2178-928-A RS-1009 FLEXIBLE BOARD, COMPLETE X-2594-596-1 LID ASSY (799), MEDIA...
  • Page 70 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 3-3. PANEL MODULE SECTION LCD901 rear side front side Ref. No. Part No. Description Ref. No. Part No. Description X-2593-924-1 PLATE ASSY (799), (REAR) 4-684-432-01 SHEET (PD (799)), ADHESIVE 4-287-435-11 SCREW (M1.4 EUROPE) TYPE 4-684-435-01 SHEET (FRONT (799)), ANTI DUST...
  • Page 71 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 3-4. VF BLOCK SECTION Refer to top cover section-1. front side LCD902 not supplied Refer to main board section. rear side (Note) (Size 10.6 12.0 mm) Note: When replacing Ref. No. 153, cut the new part to the specifi c size indicated in the fi...

  • Page 72: Top Cover Section

    2018/04/18 01:20:10 (GMT+09:00) ILCE-9 3-5. TOP COVER SECTION-1 not supplied bottom side front side rear side Refer to top cover section-2. Ref. No. Part No. Description Ref. No. Part No. Description 4-692-228-01 SHEET (799), DROP PROTECTION R 1-493-336-11 SWITCH BLOCK, CONTROL (RL79900)
  • Page 73 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 3-6. TOP COVER SECTION-2 MIC902 (Note) (Size 9 14 mm) MIC901 (Note) (Size 9 14 mm) bottom side front side rear side not supplied Note: When replacing Ref. No. 268, cut the new part to the specifi c size indicated in the fi...

  • Page 74: Main Board Section

    2018/04/18 01:20:10 (GMT+09:00) ILCE-9 3-7. MAIN BOARD SECTION front side (Note 1) (Size 9 14 mm) BT1001 (Note 2) BH1001 (Note 2) AS-1005 board : BT1001 (LITHIUM SECONDARY BATTERY) Board on the mount position. (See page 5-10 of Level 3) rear side Note 1: When replacing Ref.
  • Page 75 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 3-8. MECHA DEVICE SECTION front side Refer to front cover block section. (Note 1) Refer to MB N frame unit section. not supplied (Note 2) not supplied (Note 2) not supplied (Note 2) Refer to anti shake unit section.
  • Page 76 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 3-9. ANTI SHAKE UNIT SECTION rear side (Note 1) not supplied (All mounted parts and IS-1031 complete board are not supplied, but they are included in mecha device service (5300).) (Note 2) front side Note 1: Refer to “5.
  • Page 77 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.2 3-10. FRONT COVER BLOCK SECTION front side not supplied Refer to jack block section. 463 465 SP901 (Note) (Size 9 14 mm) ANT901 Refer to BT block section. rear side Note: When replacing Ref. No. 452, cut the new part to the specifi...
  • Page 78 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 3-11. JACK BLOCK SECTION J901 front side rear side Ref. No. Part No. Description Ref. No. Part No. Description X-2594-575-1 BASE (FRONT) ASSY (799), JACK 4-692-157-01 SHEET (799), TIE VOLTAGE 4-692-153-01 SHEET (799), JK BLIND 4-692-159-01 SHEET (799), LN FIXED...

  • Page 79: Bt Block Section

    2018/04/18 01:20:10 (GMT+09:00) ILCE-9 3-12. BT BLOCK SECTION rear side front side Ref. No. Part No. Description Ref. No. Part No. Description A-2179-097-A BT SOLDER 1-846-474-31 CABLE, COAXIAL (110 mm) (BT-2019 FLEXIBLE BOARD, COMPLETE) 2-635-562-11 SCREW (M1.7) 4-692-150-01 PLATE (799), VG REAR RETAINER...
  • Page 80 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.1 3-13. MB N FRAME UNIT SECTION (Note 2) rear side not supplied not supplied front side (Note 1) Note 1: The mecha device service (5300) (Ref. No. 351) includes a protective MB body cap. Note 2: The mecha device service (5300) (Ref. No. 351) does not include the DP sheet N frame (79160) (Ref.

  • Page 81: Supplied Accessories

    2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Ver. 1.1 4. SUPPLIED ACCESSORIES Note: • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The components identified by mark 0 or dotted line with mark are critical for safety.
  • Page 82 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 5. CLEANING Preparation for Remedy Cleaning Procedure for the OLPF If you use the CCD cleaning Jig (New) (J-6082-663-A) below, make 1. Clean up the tip of CCD cleaning jig. sure to clean the Tip of the CCD cleaning jig below before using.
  • Page 83 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 6. ADJUSTMENT For adjusting this models, the Adjust manual and the Adjust station are required. Adjust station It is the software to start up Adjust manual for each model. The installer of the Adjust station and the installation manual are attached, be sure to confirm the contents of them.
  • Page 84 2018/04/18 01:20:10 (GMT+09:00) ILCE-9 Revision History Ver. Date History Contents 2017.05 Official Release — 2017.07 Revised-1 • Change of service parts for MB N PLATE SP (5300) (Ref. No. 604) (Page 3-13) • Change of Power cord (mains lead) for AEP and RU (Page 4-1) 2018.04...

Table of Contents

Save PDF