Table of Contents
Advertisement
Press the MOVIE button again to stop recording.
4
To shoot with the touch function icons
You can also start shooting by touching an icon on the screen instead of pressing the MOVIE (movie) button. Swipe the
monitor left or right to display the touch function icons, and then touch the
captured image by touching the
For details on how to display the touch function icons, see
To select the recording format (
The resolution and degree of compatibility vary depending on the recording format (XAVC HS 4K/XAVC S 4K/XAVC S
HD/XAVC S-I 4K/XAVC S-I HD). Select the format in accordance with the purpose of the movie to be shot.
To select the frame rate or image quality (
The frame rate determines the smoothness of motion in movies. ([
The image quality changes with the bit rate. ([
If the bit rate is high, the amount of information will increase and you can shoot high-quality movies. However, this will
result in a larger volume of data.
Select the frame rate and bit rate according to your preference and purpose.
To adjust the exposure (Exposure Ctrl Type/Exposure mode)
When [Exposure Ctrl Type] is set to [P/A/S/M Mode], select the exposure mode using the shutter speed and aperture
value combination in the same way as when shooting a still image.
When [Exposure Ctrl Type] is set to [Flexible Exp. Mode], you can set the shutter speed, aperture value, and ISO
sensitivity automatically or manually.
Also, if you enable [Touch AE] under [Touch Func. in Shooting], you can adjust the exposure to the touched area.
To select the focusing method (focus mode/focus area)
Use the focus mode dial to select AF-C (Continuous AF) or MF (Manual Focus). You can specify the focus area by setting
[
Focus Area].
Even during shooting with manual focus, you can temporarily switch to auto focus in the following ways.
Press the custom key to which [AF On] is assigned, or press the shutter button halfway.
Press the custom key to which [Subject Recognition AF] is assigned.
Touch the subject on the monitor. (when [Touch Func. in Shooting] under [Shooting Screen] is set to [Touch Focus] or
[Touch Tracking])
To record movie audio in 4 channels
Attach a genuine Sony accessory that supports 4-channel and 24-bit audio recording to the Multi Interface Shoe of the
camera.
Hint
You can also assign the start/stop movie recording function to a preferred key.
You can focus quickly while shooting movies by pressing the shutter button halfway down. (The sound of auto focus operation
may be recorded in some cases.)
You can change the settings for ISO sensitivity, exposure compensation, and focus area while shooting movies.
The sounds of the camera and lens in operation may be recorded during movie shooting. To prevent sounds from being recorded,
set [Audio Recording] to [Off].
To prevent the operating sound of the zoom ring from being recorded when a power zoom lens is used, we recommend recording
movies using the zoom lever of the lens. When moving the zoom lever of the lens, be careful not to flip the lever.
(switch to playback screen) icon.
"Touch function
File Format)
Movie Settings)
Movie Settings] → [Record Setting])
108
(start recording) icon. You can view the
icons."
Movie Settings] → [Rec Frame Rate])
Advertisement
Table of Contents
