Sony ILCE-9M3 Help Manual page 364

Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3
α9III
SteadyShot Adjust. (still image/movie)
You can shoot with an appropriate SteadyShot setting for the attached lens.
MENU →
1
Menu item details
Auto:
Performs the SteadyShot function automatically according to the information obtained from the attached lens.
Manual:
Performs the SteadyShot function according to the focal-length set using [
Note
The SteadyShot function may not work optimally when the power has just been turned on, right after you point the camera
towards a subject, or when the shutter button has been pressed all the way down without stopping halfway.
When the camera cannot obtain focal length information from the lens, the SteadyShot function does not work correctly. Set [
SteadyShot Adjust.] to [Manual] and set [
focal length will be displayed along with the
When using an SEL16F28 lens (sold separately) with a teleconverter, etc., set [
focal length.
If a lens equipped with a SteadyShot switch is attached, the settings can only be changed using that switch on the lens. You
cannot switch the settings using the camera.
Related Topic
SteadyShot focal length (still image/movie)
(Shooting) → [Image Stabilization] → [
5-056-662-11(1) Copyright 2023 Sony Corporation
SteadyShot Adjust.] → desired setting.
Focal Length] to match the lens you are using. The currently set SteadyShot
(SteadyShot) icon.
364
Focal Length]. (8mm-1000mm)
SteadyShot Adjust.] to [Manual] and set the
TP1001159235