Sony ILCE-9M3 Help Manual page 570

Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3
α9III
Operating the camera from a computer (PC Remote Function)
Uses a Wi-Fi or USB connection, etc. to control the camera from a computer, including such functions as shooting and
storing images on the computer.
When the camera and a smartphone are connected, you cannot control the camera from a computer. Make sure that the
camera is not connected to a smartphone beforehand.
For details on [PC Remote Function], refer to the following URL:
https://support.d-imaging.sony.co.jp/app/imagingedge/l/instruction/4_1_connection/index.php
The following is the procedure for connecting the camera to your computer using a Wi-Fi connection via a Wi-Fi access
point. If you will use another connection method, refer to "How to connect the camera and the computer using a method
other than a Wi-Fi access point."
Select MENU →
1
access point.
Connect the computer to the same Wi-Fi access point.
Select MENU →
2
Select [Access Authen. Info] to display the information such as the username, password, and fingerprint.
3
You can check the information by selecting MENU →
Info].
Launch Imaging Edge Desktop (Remote) on the computer, and then enter and confirm the access
4
authentication information.
You can now operate the camera using Imaging Edge Desktop (Remote).
Menu item details
PC Remote:
Sets whether or not to use the [PC Remote] function. ([On] / [Off])
Connect without Pairing:
Selects whether to connect the camera to a computer without pairing when connecting the camera to a computer via a
wired LAN or Wi-Fi access point. ([Enable]/[Disable])
Pairing:
When connecting the camera to a computer via a wired LAN or Wi-Fi access point without using [Access Authen.], pair
the camera with the computer.
Wi-Fi Direct Info.:
Displays information for connecting the computer and the camera via Wi-Fi Direct.
How to connect the camera and the computer using a method other than a Wi-Fi access point
When connecting with Wi-Fi Direct
Use the camera as an access point, and connect the computer to the camera directly via Wi-Fi.
Select MENU → (Network) → [
Wi-Fi connection information (SSID and password) for the camera. Connect the computer and the camera using the Wi-
(Network) → [Wi-Fi] → [Wi-Fi Connect] → [On] to connect the camera to the Wi-Fi
(Network) → [ Cnct./PC Remote] → [PC Remote Function] → [PC Remote] → [On].
Cnct./PC Remote] → [PC Remote Function] → [Wi-Fi Direct Info.] to display the
(Network) → [Network Option] → [Access Authen.
570