SUN2000-111KTL-NHM0
User Manual
Figure 5-5 Opening the maintenance compartment door
Step 2 Remove the accessories and keep them properly.
Figure 5-6 Removing the accessories
----End
Follow-up Procedure
Use scissors to cut off the joints of the rubber rings to remove them. All rubber
rings are removed in the same way.
Remove the corresponding rubber rings in strict accordance with the cable
diameter, and ensure that the crimping module is not damaged. Otherwise the
protection level of the solar inverter will be affected.
Issue 09 (2023-12-18)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
50