Huawei SUN2000-111KTL-NHM0 User Manual page 101

SUN2000-111KTL-NHM0
User Manual
Parameters
No. Parameter
1 Remote power
schedule
2 Schedule instruction
valid duration (s)
3 Maximum apparent
power
4 Maximum active
power (kW)
5 Shutdown at 0%
power limit
6 Active power
change gradient
(%/s)
7 Derated by active
power % (%)
8 Derated by fixed
active power (kW)
9 Reactive power
output at night
Issue 09 (2023-12-18)
Description
If this parameter is set to Enable,
the inverter responds to the
scheduling instruction from the
remote port. If this parameter is
set to Disable, the inverter does
not respond to the scheduling
instruction from the remote port.
Specifies the time for maintaining
the scheduling instruction.
Specifies the time for maintaining
the scheduling instruction.
Specifies the output upper
threshold for the maximum active
power to adapt to different market
requirements.
If this parameter is set to Enable,
the inverter shuts down after
receiving the 0% power limit
command. If this parameter is set
to Disable, the inverter does not
shut down after receiving the 0%
power limit command.
Specifies the change speed of the
inverter active power.
Adjusts the active power output of
the inverter by percentage.
Adjusts the active power output of
the inverter by fixed value.
In some specific application
scenarios, a power grid company
requires that the inverter can
perform reactive power
compensation at night to ensure
that the power factor of the local
power grid meets requirements.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Remarks
-
When this parameter is set
to 0, the scheduling
instruction takes effect
permanently.
-
-
-
-
If this parameter is set to
100, the inverter outputs
based on the maximum
output power.
-
-
93