JANE Be Cool urban go Manual page 11

EN
¡IMPORTANT! Keep these instructions
for future reference
WARNING! Never leave your child unattended.
WARNING! Ensure that all the locking devices are
enganged before use.
WARNING! To avoid injury ensure that your child is
kept away when unfolding and folding this product.
WARNING! Do not let your child play with this product.
WARNING! Use a harness as soon as your child can sit
unaided.
WARNING! Always use the restraint system.
WARNING! This product is not suitable for running or
skating.
Suitable for children under 6 months old only with
accessories approved by BE COOL.
This pushchair may only be used by one child at the
same time.
The maximum load carried in the basket must never
exceed the limit indicated on the basket (4 kg).
20
Take care when going down escalators as the rear
safety catch may come undone.
The parking device shall be engaged when placing
and removing the children.
Any load attached to the handle and/or on the back
of the backrest and/or on the sides of the vehicle will
affect the stability of the vehicle.
Only replacement parts supplied or recommended by
BE COOL shall be used.
WARNING: Move the position of the harness according
to the child's age and use the lowest, tightest position
for children under 6 months old.
"This vehicle is intended for children from 0 months
up to 22 kg or 4 yeard old (whichever happens first). "
WARNING: Never use the strap between the legs
without using the lap belt.
COMPLIES WITH EUROPEAN SAFETY STANDARD EN
1888-2:2018 +A1:2022.
WARNING! Check that the pram body or seat unit or
car seat attachment devices are correctly engaged
before use.
1. OPEN THE CHASIS
A: Press down the 2nd safety button and press upwards
the folding button and then
B: Lift up the handlebar until the "click" sounds.
C: The chasis is unfolded completely.
2. EQUIP THE WHEELS
A: Connect the front wheels to the connect pieces as the
arrow direction.
B: Connect the rear wheels on both sides as the arrow
direction.
3. EQUIP THE BUMPER BAR
A: Connect the bumper to the stands as the arrow
directions to equip the bumper bar.
B: Press the buttons on bothside and pull it towards you
to remove the bumper bar.
4. APPLY THE SWIVEL-LOCK
Push or pull the swivel-lock as arrow directions to
engage or relase the swivel-lock.
5. ADJUST THE FOOTREST
A: Press down the buttons on bothsides and adjust the
footrest downwards.
B: Hold the footrest and adjust it upwards.
6. ENGAGE THE BRAKE
A: To engage the brake: step down the the brake pedal
as photo.
B: To release the brakes: kick fowards the brake pedal as
photo.
7. ADJUST THE BACKREST
A: To adjust the backrest up: hold the belt and pull as the
arrow direcion.
B: To adjust the backrest down: press the button and pull
downtowards.
8. Fold THE PUSHCHAIR
A: Furl the canopy as arrow direction firstly.
B: Then release the folding lock as shown in photo C.
C: Press down the 2nd safty button and press upwards
the folding button.
D: The pushchair would be folded automaticly.
9. UNFOLD THE PUSHCAIR
A: Pres down the 2nd safety button and press upwards
the folding button and then
B: Lift up the handlebar until the "click" sounds.
C: The chasis is unfolded completely.
10. THE USE OF HARNESS
10_ Insert the buckle (1) and (2) in the upper part of the
central buckle and the straps remain attached.
EN
21