Table of Contents
Advertisement
Available languages
Available languages
by the manufacturer, its service agent or similarly qualified persons to
avoid a hazard.
Transport and packaging
Transport the appliance
Secure the appliance sufficiently and protect it
against weather during transport.
Unpacking the appliance
• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler
and cardboard packaging.
Dispose of packaging materials that are no longer
required in accordance with the locally applicable
regulations.
• To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
"Cleaning and maintenance"
according to chapter
Appliance equipment
Appliance overview
1 Control panel
2 Ø210 mm /
2000/2600W
3 Ø160 mm /
1500/1800W
Delivery scope
Installation material:
4 x fixing screw
The hob is designed for installation in standard
kitchen units.
WARNING:
The installation and the connection to the main power
may only be performed by an authorized specialist.
CAUTION:
The worktop, the cabinet, veneers, plastic coatings,
used adhesives etc. must be sufficient heat-resistant
(min. 100°C).
.
NOTE: Recommendation!
• When installing, ask another person to assist.
• Wear protective gloves to avoid injuries at possi-
ble sharp edges.
Safety distances
CAUTION:
Make sure that adequate air circulations ensured,
and the ventilation slots are not blocked. Follow ap-
propriate safety distances!
• The appliance must be installed so that heat can
be dissipated. The ventilation openings must not
be blocked
21
4 Ø210 mm /
2000/2600W
5 Ø160 mm /
1500/1800W
4 x mounting bracket,
Installation
(see illustration).
Advertisement
Table of Contents
