Cleaning And Maintenance; Troubleshooting - BOMANN EBKI 961 Instruction Manual

Cleaning and maintenance

WARNING:
• Always switch off the appliance completely before
cleaning and maintenance work and disconnect it
from the power supply if necessary.
• Allow the unit to cool down before cleaning.
• Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock! Hot steam could damage
the plastic parts.
• Never use flammable substances, such as thin-
ner, kerosene, gasoline or acids for cleaning.
• The unit must be dry before restarting operation.
CAUTION:
• Do not use a wire brush or other sharp, abrasive
items.
• Do not use harsh abrasive cleaners or sharp
metal objects for cleaning the glass surface. The
surfaces can be scratched or destroyed.
• Always consider the application and safety notes
of the detergent.
Cleaning the hob
• Remove food residues while the hob is still warm
with a damp cloth or paper towel.
• Wash the hob with a soft sponge and a little water
and dry thoroughly with a soft cloth.
Cleaning agent for glass ceramic surfaces
For burnt-on residues, help yourself to products from
the specialist departments of stores.
Staining Cleaning method
Dirt has ac-
Use warm water
cumulated
and a sponge to
rub dry.
Before you contact an authorized specialist
Cleaning tools
If a problem persists after following the steps above,
Special clean-
contact your distributor or an authorized technician.
ing sponge for
glass ceramic
27
Staining Cleaning method
Pools and
Apply warm vine-
lime depo-
gar and wipe off
sits
with a dry cloth or
use special clean-
ing agent.
Sugar,
Remove by using
melted alu-
a glass ceramic
minum, or
scraper.
plastic

Troubleshooting

Problem / possible cause / action
Appliance does not work
Check the power supply / main fuse.
Control panel does not react or only very difficult
- Child safety lock is activated.
- Clean and dry the operating surface.
Appliance hums at a high power level
No failure, caused by the induction technology.
Cookware is not getting hot
Cookware is not suitable.
Cracking noises during operation
Can be caused by the cookware structure (layers
of different metals).
Ventilation noise after switching off
No failure, due to overheating protection the fan
continuously run for some time.
NOTE:
Cleaning tools
Special clean-
ing agent for
glass ceramic
special clean-
ing agent and
scraper for
glass ceramic