Technical Data; Disposal - BOMANN EBKI 961 Instruction Manual

Error codes
In the case of a malfunction, the hob will automatically
go into safety mode and the respective error code will
be shown:
Code Possible cause
F3 / F4 Temperature sensor failure
F9 / FA Temperature sensor failure IGBT
E1 / E2 Abnormal supply voltage
E3 High temperature of the induction coil
temperature sensor
E5 High temperature of the IGBT tempera-
ture sensor
• Disconnect the hob from the power supply for a
while. If the error code appears again, contact
specialist.

Technical data

Electrical connection............................................
Connection voltage: 220-240/380-415V 2N~ 50/60Hz
Connection power: ...................................7000 W
Fuse protection: .......................................2 x 16 A
Dimension / Weight..............................................
Hob (HxWxD): ........................5,5 x 59,0 x 52,0 cm
Worktop cut-out (WxD): .....................56,0 x 49,0 cm
Net weight: .....................................approx. 9,0 kg
The right to make technical and design modifications
during continuous product development remains re-
served.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
Meaning of the "Dustbin" symbol
Protect our environment; do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will
no longer use to the collection points provided for
their disposal.
This helps avoid the potential effects of incorrect dis-
posal on the environment and human health.
This will contribute to the recycling and other forms of
reutilization of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local author-
ity. Your dealer and contractual partner is also
obliged to take back the old appliance free of charge.
WARNING:
Remove or disable any existing snap and bolt locks if
you take the unit out of operation or dispose it.
Information to professional users for disassembly
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
Information for non-destructive disassembly for
maintenance purposes
• A further disassembly for maintenance purposes
by the user is not provided. Do not disassemble
the unit.
• For repair and replacement of defective parts,
please contact our customer service.
• Accumulators are not included.
28

Disposal