Table of Contents
Advertisement
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For Chauvet Professional line of mounting clamps, go to www.trusst.com/products.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product:
•
Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
•
Make sure that the structure onto which the product will be mounted can support the product's
weight (see the
Technical Specifications
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When power linking multiple products, mount the products close enough for power-linking cables to
reach.
Procedure
The Ovation CYC 3 FC comes with a double-bracketed yoke to which mounting clamps can be attached
for hanging or simply use as a floor stand. Mounting clamps are sold separately. Make sure the clamps are
capable of supporting the weight of this product. For the Chauvet Professional line of mounting clamps, go
to www.trusst.com/products.
Mounting Diagram
Safety cable
Ovation CYC 3 FC User Manual Rev. 2
for weight information).
Overhead mounting
Surface mounting
Mounting clamp (x2)
Omega bracket (x2)
Retractable foot/ kick stand (x4)
9
Advertisement
Table of Contents
