McFarlane QUADRA-TILL 200 Series Operation And Parts Manual
  1. Manuals
  2. Brands
  3. McFarlane Manuals
  4. Farm Equipment
  5. QUADRA-TILL 200 Series
  6. Operation and parts manual

McFarlane QUADRA-TILL 200 Series Operation And Parts Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operation and Parts
Manual
200 Series
SIZES, SHATTERS, MIXES, & LEVELS
MFG. CO. INC.
Read and understand the manual. This manual provides information
MADE IN THE USA
and procedures to safely operate and maintain the Quadra-Till.
Version: 12256 — Serial Numbers 20309 - 20900

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QUADRA-TILL 200 Series and is the answer not in the manual?

Questions and answers

Related Manuals for McFarlane QUADRA-TILL 200 Series

Summary of Contents for McFarlane QUADRA-TILL 200 Series

  • Page 1 Operation and Parts Manual 200 Series SIZES, SHATTERS, MIXES, & LEVELS MFG. CO. INC. Read and understand the manual. This manual provides information MADE IN THE USA and procedures to safely operate and maintain the Quadra-Till. Version: 12256 — Serial Numbers 20309 - 20900...

  • Page 3: Table Of Contents

    Tow Chain ....17 Connecting to the Tractor ... . . 17 888-627-8569 Quadra-Till from McFarlane Mfg.
  • Page 4 QT-215F-I Layout ....81 QT-217F-I Layout ....82 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 5: Introduction

    Introduction Safety General Thank you for purchasing the McFarlane Quadra-Till Primary Vertical Tillage System. We know that you Safety of the operator and bystanders is one of the main will get many years of dependable service because concerns in designing and developing a new piece of McFarlane has been manufacturing quality agricultural equipment.

  • Page 6: Safety Alert Symbols

    Indicates that equipment or property damage can result if instructions are not followed. SAFETY INSTRUCTIONS Safety instructions (or equivalent) signs indicate specifi c safety-related instructions or procedures. NOTE: Contains additional information important to a procedure. Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 7: Safety Icons Nomenclature

    Damaged hazard label Entanglement hazard Set parking brake Explosive separation hazard Slow vehicle placard Falling hazard Stop engine STOP Fire hazard Support stand usage High-pressure fluid hazard Use proper tools Hose damage Visually inspect Hot surface 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 8: General Operating Safety

    5. Relieve hydraulic fl uid pressure. 6. If parking the unit, make sure jack stand is lowered and retaining pin is installed. Injury Hazard Do not permit children to play on or around the stored unit. Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 9: Component Nomenclature

    The optimum working depth of the chisel shanks is 6 to 12 inches. 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 10: Rear Leveler Disk Attachment (3)

    The rear leveler disks are adjusted with dual hydraulic cylinders that move the rear section of the unit up or down. Controls within the tractor cab allow the operator to adjust the depth while moving across the fi eld. Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 11: Qt-215F And Qt-217F Disk Gang And Leveler Disk Toolbar

    QT-215F — 18’9” (5.72 m) QT-217F — 21’3” (6.48 m) Towing Speed Towing speeds should not exceed 20 MPH (32 KPH) Field operating speeds should be 5 to 6-1/2 MPH (8 KPH to 10-1/2 KPH) 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 12: Instructions For Display Of Hazard And Informational Signs

    READ AND UNDERSTAND THE OPERATOR’S MANUAL BEFORE USING. TRANSPORT LOCKUPS MUST BE USED DURING TRANSPORT. DO NOT RUN THE DISK GANGS WITH THE SPRING INDICATOR IN THE BLACK ZONE. MAXIMUM FIELD TRAVEL SPEED IS 6.5 MPH. M200-0130 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 13: Assembly

    READ AND UNDERSTAND THE OPERATOR’S MANUAL BEFORE USING. TRANSPORT LOCKUPS MUST BE USED DURING TRANSPORT. DO NOT RUN THE DISK GANGS WITH THE SPRING INDICATOR IN THE BLACK ZONE. MAXIMUM FIELD TRAVEL SPEED IS 6.5 MPH. DC230b 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 14: Towing

    Do not exceed or tire failure may occur. Highway and Transport Operations SAFETY INSTRUCTIONS • Make sure the wheel cylinder transport locks are installed and the jack stand is in its storage position before transporting the unit. Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 15: Pre-Towing Checklist

    • Always operate equipment in a position to provide maximum visibility at all times. Make allowances for increased length and weight of the equipment when making turns, stopping, etc. Model 207 Models 209 - 217F 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 16: Hook-Up To Tractor

    12. Check routes and restrictions on bridges and tunnels. SAFETY INSTRUCTIONS If the unit is not resting on the ground, make sure wheel chocks are securely fi tted on both sides of each wheel. Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 17: Tow Chain

    SAFETY INSTRUCTIONS Inspect the chain annually for wear or damage. Do not replace the chain with anything other than an OEM certifi ed replacement. 888-627-8569 Quadra-Till from McFarlane Mfg.
  • Page 18 Note: The most commonly used function of the unit is the “main lift” cylinders, which raises and lowers the wheels. Connect the hydraulic hoses for this function into the port (control lever) used most commonly. Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 19 9. Move the unit to the desired location and position it c. Pull the plug downward. for operation following the towing recommendation provided in this manual and/or any other local, State, or Federal regulations that may apply. 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 20: Operation

    Operation Initial Setup The McFarlane Quadra-Till is a tool that is designed Safety to handle a wide variety of fi eld conditions. It has many adjustments that can be made to change the WARNING performance of each component on the unit as well as its overall performance.
  • Page 21 The shut off valve helps prevent the wheel cylinders from retracting, due too bleed off within the hydraulic system, resulting in the disk gang lowering to the ground. Adjustments for rear disk gang. 888-627-8569 Quadra-Till from McFarlane Mfg.
  • Page 22 (2) if not already extended. attached to the frame actuates the valve, stopping oil fl ow. Each time the wheels are raised and lowered, the valve will consistently position the depth of the chisel shanks. Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 23 WARNING b. Use the wrench (stored on a bracket on the main frame) to make the adjustment. STOP Before leaving the tractor, shut off the engine, set the parking brakes, and remove the ignition key. 888-627-8569 Quadra-Till from McFarlane Mfg.
  • Page 24 2 inches leveler disks, make sure the frame is still level. (51 mm), move indicator (2) down to number six. Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 25 18. Once the proper height of the leveler disk is set, insert the cylinder rod stops from their storage location and place them on the cylinder rod between the body of the cylinder and the clevis, as shown. 888-627-8569 Quadra-Till from McFarlane Mfg.
  • Page 26 Make sure all the rolling baskets are adjusted to the same height. Failure to do so will result in uneven seedbed conditions and could damage the rolling basket arms and/or bearings. Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 27: Maintenance

    fl uid penetrates the surface of the skin. Entanglement Hazard Keep hands, feet, clothing, jewelry, and long hair away from any moving parts to prevent them from getting caught. 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 28: Tire And Lug Torque Specifi Cations

    When greasing a pin and bushing, add grease until it is visibly forced out of the joint. Note: Clean grease fi ttings and replace those that are broken or missing. Over greasing may damage bearing seals and cause premature bearing failure. Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 29 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 30: Hydraulic Components

    Crush Hazard Make sure the unit is completely supported with suitable stands before removing a wheel assembly. NOTICE Make sure components in the hydraulic system are kept clean and in good working condition. Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 31: Disk Gang Disks

    (5). 8. Reinstall the spring assembly. 1. Place blocks under the disk gang frame or disk gangs to support the unit. This will remove the pressure from the spring assembly, allowing it to be removed. 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 32: Chisel Shank Spring Replacement

    (5) and lock nuts (4). Note: A straight point, a three inch twisted shovel, or a four inch twisted shovel are interchangeable on the chisel shank. 4. Install and tighten removed bolts. Do not overtighten bolt (4). Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 33: Troubleshooting

    Residue buildup on harrow bars. produce the fl attest angle on the The harrow angle is not set correctly. harrow is recommended. Setting the harrow to the steepest angle is usually recommended for spring work or light residue. 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 34: Storage

    Make sure all decals are attached to the unit and are legible at all times. Safety decals The McFarlane Quadra-Till has been designed for the and refl ective tape provide a vital role in specifi c purpose of tilling agricultural farm land. When...
  • Page 35 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 36: Parts Drawings

    Parts Drawings Hitch Frame Assembly MFM-00291 Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 37 BOLT, 3/4 - 10 x 5 BH-2520 SCREW, CAP, HEX, 1/4-20 x 2, GRADE 5 PB-0009 PIN, BRIDGE, #9 QT-1172 VALVE, BALL, 3/4” 10273 WRENCH, TURNBUCKLE NH-2520 NUT, HEX, 1/4-20 NLT-4414 NUT, LOCK, HEX, 7/16-14 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 38: Main Frame Assembly

    Main Frame Assembly M200-0011 Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 39 BOLT, 1-8 x 3-1/4 GD 8 HYC-34012 HYDRAULIC CYLINDER, 4 x 12 HYO-2103 CYLINDER CLEVIS PIN, 1 x 3 CP-3620 3/16 x 2 COTTER PIN HYA-34008 HYDRAULIC CYLINDER BH-3810 BOLT, HEX 3/8-16 x 1 GD 5 FW-0100 FLAT WASHER, 1” 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 40: Qt-215F And Qt-217F Chisel Frame

    BOLT 5/16 x 1-3/4 QT-1264 CHISEL WING LINKAGE ASSY FW-0125 FLAT WASHER, 1-1/4” QT-1265 CHISEL WING REST ASSY LW-0063 LOCK WASHER 5/8 NH-6311 HEX NUT 5/8-11 BU-5848 U-BOLT 5/8 x 4 x 8 SPR-2712 HINGE PIN 8 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 41: Disk Gang Frame Assembly (Qt-207 - Qt-213F)

    BOLT, 1/2-13 X 1-1/4 CL-1006 CLEVIS PIN, 1 x 6 NH-5013 NUT, 1/2-13 FW-0100 FLAT WASHER, 1” LW-0050 LOCK WASHER, 1/2 CP-3620 COTTER PIN, 3/16 x 2 BH-5028 BOLT, 1/2-13 x 2 3/4 GD 5 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 42: Qt-215F And Qt-217F Disk Frame

    BOLT 3/8-16 x 2-1/4 QT-1272 DISK ADJUST CLAMP WING ASSY NLT-3816 NUT TOP LOCK 3/8-16 FW-0100 WASHER, FLAT, 1” 10673 BOLT, 1 x 7, GRADE 8 LONG SHOULDER NLT -1008 NUT, TOP LOCK, 1 - 8 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 43: Disk Gang Mounting Hardware

    BUSHING, DISK ADJUST PIVOT STOP NY-1307 NUT, NYLON LOCK 1-1/4 - 7 NC-1008 NUT, CASTLE 1-8 PC-1913 PIN, CLICK, 3/8 x 1.56 11103 DISK FRAME, 7 & 9 11104 DISK FRAME, 11 & 13 11105 DISK FRAME, 13F 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 44: Disk Gang Assembly (All Models)

    Disk Gang Assembly (All Models) 16 18 20 23 17 19 M200-0005a Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 45 LOCK WASHER 3/4” 10546 FRONT INSIDE 13, REAR INSIDE 13, REAR WING 13F *Quantities vary 10547 SCRAPER TUBE, REAR OUTSIDE 13 10548 SCRAPER TUBE, FRONT CENTER 15 SCRAPER TUBE, FRONT WING 15, 10549 REAR CENTER 15 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 46: Folding Disk Mount Tube Assembly (Model Qt-213F Rear Only)

    PIN, COTTER, 3/16 x 2 HYO-2103 CYLINDER CLEVIS PIN, 1 x 3 BH-5028 BOLT, HEX, 1/2-13 x 2-3/4 FW-0100 WASHER, FLAT, 1 BHY-7535 BOLT, 3/4-10 X 3-1/2, GR8 BH-6325 BOLT, 5/8-11 X 2-1/2 RT-2054 SPACER BUSHING, GANGED BLADES ONLY Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 47: Independent Disk Blades

    ** On outside of unit only. All other disk gangs have all 11180 DISK MNT TUBE, REAR LT WING, 215F 24” blades. 11461 DISK MNT TUBE, REAR LT WING, 217F 11245 DISK MNT TUBE, REAR RT WING, 215F 11462 DISK MNT TUBE, REAR RT WING, 217F 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 48: Axle Frame Assembly

    Axle Frame Assembly this component shown backwards M200-0007 Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 49 BOLT, 1/2-16 x 2-3/4 GD 5 QT-1021 HYD STOP TUBE QT-1133 AXLE MOUNT UHMW INSERT QT-1132 AXLE MOUNT CAP BH-3815 BOLT, 3/8-16 x 1-1/2” GRADE 5 QT-1130 AXLE MOUNT ASSY NLT-3816 NUT, TOP LOCK 3/8-16 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 50: Spindle And Hub

    14L-16.1 14T TIRE, 14 PLY (13-SHANK) 12.5L-15-18T TIRE, 18 PLY (11-SHANK) QT-1242 RIM, 16.1 x 14, 8-BOLT, 7000 LB. RT-2179 RIM, 15 x 10, 8 BOLT (9 AND 11-SHANK) QT-1241 RIM, 16.1 x 11, 8-BOLT (13-SHANK) Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 51: Spindle And Hub (Continued)

    WB-5010 WHEEL BOLTS HD-1171 OUTER RACE HD-1363 OUTER BEARING HD-1364 SPINDLE FLAT WASHER HD-1365 SPINDLE HEX CASTLE NUT CP-1517 COTTER PIN (0.150 X 1 3/4) HD-1367 DUST CAP HD-1371 6-HOLE HUB ASSEMBLY (INCLUDES ITEMS 2,3,7,11,15) 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 52: Chisel Shank Assembly

    CHISEL SHANK MOUNT ASSY QT-1175 HDD-016 SQUARE WASHER, 1/2 QT-1180 CHISEL MOUNT PIVOT PIN 10502 SET SCREW, 3/8-16 x 3/8 QT-1181 CHISEL SPRING PIVOT PIN NLT-7510 NUT, TOP LOCK 3/4-10 BH-5028 BOLT, 1/2-13 X 2-3/4 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 53: Leveler Disk Frame Arms

    QT-1303 LEVELER FRAME MOUNT, RT, HYO-2103 CYLINDER CLEVIS PIN, 1 x 3 213F, 215F, and 217F HYR-4008 HYDRAULIC CYLINDER 4 x 8 HYS-1212 CYLINDER LOCK ASSY 2 x 14 HYR-3808 HYDRAULIC CYLINDER 3-3/4 x 8 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 54: Leveler Disk Assembly

    PIN, COTTER, 0.150 x 1-1/4 HD-1160 GREASE SEAL QT-1026 LEVELER DISK HUB PLATE HD-1162 INNER BEARING BHF-5013 BOLT, 1/2-20 x 1-1/4 GD 8 HD-1171 INNER RACE RD-5092 HUB RETAINER HD-1161 HUB WITH RACES, 4 HOLE Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 55 QT-1160 LEVELER TOOLBAR, 7 QT-1044 LEVELER TOOLBAR, 9 — — — QT-1045 LEVELER TOOLBAR, 11 — — — QT-1046 LEVELER TOOLBAR, 13 LB-1107 LIGHT, RED BH-2575 BOLT, 1/4-20 x 3/4 BH-2513 BOLT, 1/4-20 x 1-1/4 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 56: Leveler Disk Frame (Qt-213F, Qt-215F, And Qt-217F)

    Leveler Disk Frame (QT-213F, QT-215F, and QT-217F) 213F 213F 215F, 217F 215F, 217F 36 32 29 28 M200-0012a Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 57 11128 NLT-5612 NUT, TOP LOCK, 9/16-12 (207-213F) HYO-2103 PIN, STRAIGHT, 1 x 3-1/2 LW-0050 WASHER, LOCK 1/2 CP-3620 PIN, COTTER, 3/16 x 2.00 RD-5056 BRACKET, LIGHT, SINGLE, INNER LB-1107 LIGHT, RED 11126 BRACKET, LIGHT, LT 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 58: 4-Bar Harrow Lift Arm Assembly

    LOCK BAR, LIFT CHAIN ASSY 4-BAR BC-6340 BOLT, CARRIAGE 5/8-11 x 4 GD 5 PC-1913 PIN, CLICK 3/16 x 1-9/16 CH-0805 3/8 x 5 CHAIN LW-0063 LOCK WASHER, 5/8 NH-6311 NUT, HEX, 5/8-11 BH-5018 BOLT, 1/2-13 x 1-3/4 GD 5 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 59: 4-Bar Harrow Sections

    #1 HARROW BAR (CT-60) 58” CT-264 #4 HARROW BAR (CT-60) 58” CT-271 #1 HARROW BAR (CT-70) 69” CT-274 #4 HARROW BAR (CT-70) 69” CT-281 #1 HARROW BAR (CT-80) 80” CT-284 #4 HARROW BAR (CT-80) 80” * Quantities vary. 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 60: 3-Bar Harrow Lift Arm Assembly

    ARM, LIFT, 3-BAR ASSY 10718 PLATE, PIVOT BH-6320 BOLT, 5/8-11 X 2 GD 5 10710 BUSHING, PLASTIC NLT-7510 NUT, TOP LOCK, 3/4-10 10678 TUBE, PIVOT RD-5094 LOCK BAR, LIFT CHAIN ASSY 3-BAR BH-5018 BOLT, HEX, 1/2-13 X 1-3/4 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 61: 3-Bar Harrow Sections

    #1 HARROW BAR (CT-40-3) 36” FA-4103 3/8 V-BOLT PLATE CT-351 #1 HARROW BAR (CT-50-3) 47” NLT-3816 3/8-16 TOP LOCK NUT CT-361 #1 HARROW BAR (CT-60-3) 58” CT-371 #1 HARROW BAR (CT-70-3) 69” * Quantities vary. 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 62: Rolling Basket Assembly

    ROLLING BASKET, 74” 10624 ROLLING BASKET ASSEMBLY, 52” 10465 ROLLING BASKET, 85” 10629 ROLLING BASKET ASSEMBLY, 63” 11081 ROLLING BASKET ASSEMBLY, 74” NLT-7510 NUT, TOP LOCK, 3/4-10 10580 ROLLING BASKET ASSEMBLY, 85” NLT-5013 NUT, TOP LOCK, 1/2-13 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 63: Main Lift Depth Stop Assembly

    HYDRAULIC STOP AXLE BRACKET RD-4355 SPRING, 1 x 3 BH-3810 BOLT, 3/8 - 16 x 1 GD 5 QT-1158 HYD STOP CRANK QT NLT-3816 NUT, TOP LOCK, 3/8 - 16 RD-4357 PIN, SPRING ROLL 3/16 x 1-1/2 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 64: Lighting And Wiring Harness

    LIGHT, AMBER 11126 BRACKET, LIGHT, OUTER, LT (215F, 217F) 11127 BRACKET, LIGHT, OUTER, RT (215F, 217F) LIGHT HARNESS WISHBONE LB-1505 EXTENSION, 5’ (QT-213F ONLY) RD-5056 BRACKET, LIGHT, SINGLE, INNER BRACKET, LIGHT, SINGLE, OUTER 11128 (207-213F) Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 65: Wheel Cylinder Hydraulics

    HYDRAULIC HOSE COVER, 25” HYH-1004 HYDRAULIC HOSE, 1/2 X 128 HYS-2002 HYDRAULIC HOSE COVER, 85” HYH-2080 HYDRAULIC HOSE, 1/2 X 80 HYS-2005 HYDRAULIC HOSE COVER, 42” QT-1172 3/4 BALL VALVE HYS-2006 HYDRAULIC HOSE COVER, 60” HYO-1212 HYDRA-GRIP, YELLOW 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 66: Leveler Disk Hydraulics

    HYDRAULIC ADAPTER, 1/2M-1/2M ORB BH-3415 BOLT, HEX, 5/16 x 4-1/2” HYH-1007 HYDRAULIC HOSE, 1/2 X 168" HYD RESTRICTOR, SWIVEL, 1/2Fp - QT-1058 HYD LOCK VALVE HY-1301 1/2 Mp, 1/16 HYO-1210 HYDRA-GRIP, RED HYF-4002 HYD DISCONNECT MALE Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 67: Disk Gang Hydraulics

    DISK HITCH PIVOT PIN REAR NLT-3816 NUT, TOP LOCK 3/8-16 QT-1058 HYDRAULIC LOCK VALVE BH-3823 BOLT, 3/8-16 x 2-1/4 GD 5 HYH-1007 HYDRAULIC HOSE, 1/2 X 168 HYS-2001 HYDRAULIC HOSE COVER, 110” HYO-1211 HYDRA-GRIP, GREEN 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 68: Hydraulic Diagram For Qt-213F Wing Fold Cylinders

    CYLINDER, 3 X 14 HYF-3220 HYDRAULIC ADAPTER, 1/2M - 1/2M HYS-2007 HYDRAULIC HOSE COVER, 70” HYS-2005 HYDRAULIC HOSE COVER, 42” HYH-1022 HYDRAULIC HOSE 1/2 X 136 HYS-2008 HYDRAULIC HOSE COVER, 134” HYA-33008 CYLINDER, 3 X 8 ASAE Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 69: Hydraulic Diagram For Qt-215Fand Qt-217F Wing Fold Cylinders

    HYDRAULIC HOSE 1/2 X 40 HYO-1213 HYDRA-GRIP (BLACK) HYH-2022 HYDRAULIC HOSE 1/2 X 22 HYF-4002 HYDRAULIC DISCONNECT, MALE HYC-33014 CYLINDER, 3 X 14 HYH-2032 HYDRAULIC HOSE 1/2 X 32 HYH-2085 HYDRAULIC HOSE 1/2 X 85 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 70: Chisel Shank Layout Diagram

    Chisel Shank Layout Diagram QT-207 - Shank Frame QT207 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 71: Qt-209 - Shank Frame

    QT-209 - Shank Frame QT209 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 72: Qt-211 - Shank Frame

    QT-211 - Shank Frame QT211 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 73: Qt-213 - Shank Frame

    QT-213 - Shank Frame QT213 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 74: Qt-213F - Shank Frame

    QT-213F - Shank Frame 5-BLADE 5-BLADE 5-BLADE 5-BLADE 7-BLADE 7-BLADE 4-BLADE 4-BLADE 17 1/2 12 1/2 CT-50 CT-50 CT-50 CT-60 QT213F Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 75: Qt-215F - Shank Frame

    QT-215F - Shank Frame 5-BLADE 5-BLADE 7-BLADE 7-BLADE 7-BLADE 7-BLADE 6-BLADE 6-BLADE 33 1/2 6 1/2 6 1/2 6 1/2 6 1/2 6 1/2 6 1/2 CT-40 CT-40 CT-80 CT-80 QT215F 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 76: Qt-217F - Shank Frame

    30" 30" 19" 11" 23 1/2" 29" 30" 30" 31" 29" 30" 30 1/2" 6 1/2" 6 1/2" 6 1/2" 6 1/2" 6 1/2" 6 1/2" 6 1/2" 6 1/2" CT-50 CT-80 CT-80 CT-50 MFM-00316 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 77: Rolling Basket Layout Diagram

    Rolling Basket Layout Diagram QT-207 - Rolling Basket Layout CT-70-3 CT-70-3 11081 11081 74” 74” MFM-00294 QT-209 - Rolling Basket Layout CT-80-3 CT-80-3 10580 10580 85” 85” MFM-00295 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 78: Qt-211 - Rolling Basket Layout

    QT-211 - Rolling Basket Layout CT-60-3 CT-70-3 CT-60-3 10629 11081 10629 63” 74” 63” MFM-00296 QT-213F - Rolling Basket Layout CT-50-3 CT-60-3 CT-50-3 CT-50-3 10624 10629 10624 10624 52” 63” 52” 52” 1” – 1-1/2” MFM-00297 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 79: Qt-215F - Rolling Basket Layout

    CT-80-3 CT-40-3 10583 10580 10580 10583 41” 85” 85” 41” 1” – 1-1/2” MFM-00298 QT-217F - Rolling Basket Layout CT-50-3 CT-80-3 CT-80-3 CT-50-3 1" - 1-1/2" 10624 10580 10580 10624 52" 85" 85" 52" MFM-00315 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 80: Layout Diagram

    Independent Disk Blade Layout Diagram QT-209-I Layout 5-BLADE 5-BLADE NOTCHED NOTCHED 6-BLADE SMOOTH 7-BLADE SMOOTH M200-0313 QT-211-I - Layout 7-BLADE 7-BLADE NOTCHED NOTCHED 9-BLADE 8-BLADE SMOOTH SMOOTH M200-0314 Quadra-Till from McFarlane Mfg. 888-627-8569...

  • Page 81: Qt-213F-I Layout

    QT-213F-I Layout 8-BLADE 8-BLADE NOTCHED NOTCHED 7-BLADE 6-BLADE SMOOTH SMOOTH 3-BLADE 3-BLADE SMOOTH SMOOTH M200-0317 QT-215F-I Layout 3-BLADE 3-BLADE NOTCHED NOTCHED 6-BLADE 6-BLADE NOTCHED NOTCHED 5-BLADE 6-BLADE SMOOTH 5-BLADE SMOOTH 5-BLADE SMOOTH SMOOTH M200-0318 888-627-8569 Quadra-Till from McFarlane Mfg.

  • Page 82: Qt-217F-I Layout

    QT-217F-I Layout 4-BLADE 4-BLADE NOTCHED 6-BLADE NOTCHED 6-BLADE NOTCHED NOTCHED 5-BLADE 6-BLADE SMOOTH 6-BLADE 6-BLADE SMOOTH SMOOTH SMOOTH M200-0319 Quadra-Till from McFarlane Mfg. 800-627-8569...
  • Page 83 Limited Warranty Statement FULL ONE YEAR WARRANTY If within one year from the date of purchase, this Quadra-Till fails due to a defect in material or workmanship, McFarlane Mfg. Co., Inc. will repair it, free of charge. Warranty service is available by simply contacting the nearest McFarlane dealership throughout the United States or Canada.
  • Page 84 Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 85 WARRANTY REGISTRATION FORM & INSPECTION REPORT This form must be filled out by the dealer and buyer and the initialed and signed copy sent to: McFarlane Mfg. Co., Inc., 1259 South Water Street, P.O. Box 100, Sauk City, WI 53583. WARRANTY REGISTRATION This form must be filled out by the dealer and signed by both the dealer and customer at the time of delivery.
  • Page 86 Quadra-Till from McFarlane Mfg. 888-627-8569...
  • Page 88 Member of Dealer Information 1330 DALLAS STREET, P.O. BOX 100 SAUK CITY, WISCONSIN 535 3 PHONE: (60 ) 643-3322 TOLL FREE: ( ) 627- 569 FAX: (60 ) 643-3976 WEB: www.fl exharrow.com Last Revised 11-01-2016...

This manual is also suitable for:

Quadra-till qt-207Quadra-till qt-209Quadra-till qt-211Quadra-till qt-213Quadra-till qt-213fQuadra-till qt-215f ... Show all

Table of Contents