Page 6
DANGER WARNING CAUTION NOTICE Indicates that equipment or property damage can result if instructions are not followed. SAFETY INSTRUCTIONS...
Page 7
Maintain safe distance Do not alter or modify Overturn hazard Do not leave out tools Pinch point hazard Do not weld Pressure alert / check pressure No alcohol Projectile hazard Read the manual No children Safety alert symbol Maintenance procedure No drugs Sharp object hazard Crush hazard...
Page 8
WARNING WARNING Impaired Operator Hazard Read And Understand Manual Personal Protection Equipment Safe Distance Hazard And Information Signs SAFETY INSTRUCTIONS Damaged Parts Hazard Visually Inspect Fall Hazard Entanglement Hazard Crush Hazard (Rolling Over) STOP Injury Hazard...
Page 10
NOTICE In high residue situations, maximum down pressure on the disks is required to more completely cut the residue. In creating the maximum down pressure, make sure the C-spring stops do not constantly contact the frame, as this will cause equipment damage.
Page 13
NOTICE 1 Turn = 1/2” READ AND UNDERSTAND THE OPERATOR’S MANUAL BEFORE USING. TRANSPORT LOCKUPS AND WING LOCK Deeper PINS MUST BE USED DURING TRANSPORT. DO NOT RUN THE DISK GANGS TO A DEPTH GREATER THAN 4 (FOUR) INCHES. MAXIMUM FIELD TRAVEL SPEED IS 9 MPH. DC-231 DC-306 DC-300...
Page 14
NOTICE READ AND UNDERSTAND THE OPERATOR’S MANUAL BEFORE USING. TRANSPORT LOCKUPS AND WING LOCK PINS MUST BE USED DURING TRANSPORT. DO NOT RUN THE DISK GANGS TO A DEPTH GREATER THAN 4 (FOUR) INCHES. MAXIMUM FIELD TRAVEL SPEED IS 9 MPH. A B C D E F G Each mark represents a 1”...
Page 22
WARNING Entanglement Hazard Crush Hazard (Rolling Over) WARNING Crush Hazard (Rolling Over) Pinch Point Hazard STOP Sharp Object Hazard Overturn Hazard Safe Distance SAFETY INSTRUCTIONS NOTICE DO NOT turn while the unit is in the ground. DO NOT operate the unit in frozen ground.
Page 32
SAFETY INSTRUCTIONS WARNING Rolling Over / Crush Hazard STOP Rolling Over Hazard Use Properly Rated Tools Crush Hazard High-Pressure Fluids Entanglement Hazard...
Page 33
No Marking 3 Radial Lines 6 Radial Lines...
Page 97
WARRANTY REGISTRATION FORM & INSPECTION REPORT This form must be filled out by the dealer and buyer and the initialed and signed copy sent to: McFarlane Mfg. Co., Inc., 1259 South Water Street, P.O. Box 100, Sauk City, WI 53583. WARRANTY REGISTRATION This form must be filled out by the dealer and signed by both the dealer and customer at the time of delivery.
Need help?
Do you have a question about the Reel Disk 4100 Series and is the answer not in the manual?
Questions and answers