Table of Contents
Advertisement
Quick Links
Induction Boiling Tops (Jan 23 onwards)
E3901i / E3902i E3903i / E3904i
INSTALLATION and SERVICING INSTRUCTIONS
IMPORTANT
The installer must ensure that the installation of the appliance is in conformity with these
instructions and National Regulations in force at the time of installation. Particular attention MUST
be paid to –
BS7671 IEE Wiring Regulations
Health and Safety At Work Act
WARNING
BEFORE ATTEMPTING ANY MAINTENANCE, ISOLATE THE APPLIANCE AT THE MAINS
ISOLATING
SWITCH
INADVERTENTLY SWITCHED ON.
IT IS MOST IMPORTANT THAT THESE INSTRUCTIONS BE CONSULTED BEFORE
INSTALLING AND COMMISSIONING THIS APPLIANCE. FAILURE TO COMPLY WITH THE
SPECIFIED PROCEDURES MAY RESULT IN DAMAGE & NEED FOR A SERVICE CALL.
On completion of the installation these instructions should be left with the Engineer-in-Charge
for reference during servicing. In addition, the Users Instructions should be handed to the User,
having had a demonstration of the operation and cleaning of the appliance.
PREVENTATIVE MAINTENANCE CONTRACT
To
obtain maximum performance from this unit regular servicing of the appliance should be undertaken
to ensure correct operation, it is functioning as intended, and safe to use. We recommend servicing in
accordance with SFG20 Maintenance Schedules and as a minimum, after 2,500 hours of use, or
annually, whichever comes
contact. Visits may then be made at agreed intervals to carry out adjustments and repairs.
WEEE Directive Registration No. WEE/DC0059TT/PRO
At end of unit life, dispose of appliance and any replacement parts in a safe
manner, via a licensed waste handler. Units are designed to be dismantled easily
and recycling of all material is encouraged whenever practicable.
Falcon Foodservice Equipment
Wallace View, Hillfoots Road, Stirling. FK9 5PY.
Scotland.
Phone: 01786 455200
Electricity at Work Regulations
Fire Precautions Act
AND
TAKE
STEPS
first and
that a maintenance contract be arranged with an appointed service
TO
ENSURE
THAT
IT
CANNOT
BE
T101079 Ref. 4
1
Advertisement
Table of Contents
Related Manuals for Falcon E3901i
Summary of Contents for Falcon E3901i
- Page 1 Induction Boiling Tops (Jan 23 onwards) E3901i / E3902i E3903i / E3904i INSTALLATION and SERVICING INSTRUCTIONS IMPORTANT The installer must ensure that the installation of the appliance is in conformity with these instructions and National Regulations in force at the time of installation. Particular attention MUST be paid to –...
- Page 2 IMPORTANT INFORMATION ELECTRICAL SAFETY AND ADVICE REGARDING SUPPLEMENTARY ELECTRICAL PROTECTION Commercial kitchens and foodservice areas are environments where electrical appliances may be located close to liquids or operate in and around damp conditions or where restricted movement for installation and service is evident. The installation and periodic inspection of the appliance should only be undertaken by a qualified, skilled and competent electrician;...
-
Page 3: Section 1 - Installation
TO PREVENT SHOCKS, ALL APPLIANCES MUST BE EARTHED. UNLESS OTHERWISE STATED, PARTS WHICH HAVE BEEN PROTECTED BY THE MANUFACTURER ARE NOT TO BE ADJUSTED BY THE INSTALLER. 1.1 MODEL NUMBER, NETT WEIGHT and DIMENSIONS Model Width Depth Height Weight (kg) (mm) (mm) (mm) E3901i E3902i E3903i E3904i... -
Page 4: Electrical Supply
1.2 SITING The appliance should be installed in a well-lit position on a firm, level, non-combustible floor. The unit is provided with rear stand-off plates to ensure a minimum 50mm gap between appliance and rear wall. These must NEVER be bent, twisted or deformed, the 50mm gap must never be covered, blocked or reduced. -
Page 5: Electrical Ratings
MAINS INPUT CONNECTION CABLE IS NOT SUPPLIED; SUITABLE CABLE WILL CONFORM TO CODE DESIGNATION IEC 60245-57. 1.5 ELECTRICAL RATINGS Electrical loading is also stated on appliance data plate. MODEL VOLTAGE POWER E3901i 400V 3~ 11.00A 11.00A 11.00A E3902i 400V 3~ 10kW 15.75A... -
Page 6: Section 2 - Assembly And Commissioning
SECTION 2 - ASSEMBLY and COMMISSIONING NOTE: USERS MUST BE MADE AWARE THAT INDIVIDUALS FITTED WITH A PACEMAKER SHOULD CONSULT THEIR DOCTOR IF IN CLOSE PROXIMITY TO THIS UNIT. THIS INDUCTION UNIT EMANATES A 20KHZ OUTPUT THAT MAY EFFECT OLDER TYPES OF PACEMAKER. Warning DO NOT USE THE UNIT IF THE CERAMIC TOP IS CHIPPED, CRACKED OR BROKEN. -
Page 7: Instruction To User
2.3 INSTRUCTION TO USER After installation and commissioning is completed, please hand User Instructions to user and ensure that the person(s) responsible understand the instructions regarding correct operation and cleaning of the appliance. Particular emphasis should be given to: ● Suitable pan type, ●... -
Page 8: Section 3 - Servicing, Maintenance And Conversion
1. Model number – found on data plate 2. Serial number – found on data plate 3. Brief description of the issue To contact Falcon for a warranty issue dial (UK only) 01786 455 200 and select Warranty Issues from the menu. WARNING -... -
Page 9: Control Panel
Pozidriv screwdriver (#2) 5mm slotted screwdriver 3.1 CONTROL PANEL a) Remove Control Panel by removing two screws (E3901i& E3902i), three screws (E3903i& E3904i) from under front of the glass-ceramic top. b) Release two bolts from under front panel. Replace in reverse order. - Page 10 3.4 HOB ASSEMBLY To access generator: a) Remove two screws (E3901i& E3902i), three screws (E3903i & E3904i) from under front of the glass-ceramic top. b) Tilt hob up and lift out hob stay. Fit hob stay cranked end into slot provided on hob as shown above.
-
Page 11: Section 4 Spare Parts
To replace the ceramic-glass hob assembly: a) Remove control panel as detailed in Section 3.1. b) Remove 2 fixings (E3901i/2i) 4 fixing (E3903i/4i) from the front and two fixings from the back of hob rear upstand. Lift hob to an angle of approx. 30° then rotate rear upstand to release it from the hob frame. -
Page 12: Section 5: Fault Finding
SECTION 5: FAULT FINDING Note: Most faults can be rectified by simply switching unit off for 10 seconds. After this time, turn power back on at mains supply. If fault continues to occur after such action then please refer to the table. This will provide a solution to rectify the condition. - Page 13 Troubleshooting Without Error Code Symptom Possible Cause Corrective Action Pan does not heat up on glass-top. No power supply. Check incoming power supply (Example, power cable LED is not illuminating/flashing plugged into the wall socket). Check kitchen main fuse box. Unit is turned off.
- Page 14 Defective unit. Only if possible and safe, disconnect the appliance from the power supply. Contact an authorized service engineer. (1) Appliance does not react to control Unit is turned off. Turn control knob to an ON-position. knob positions Defective control knob. Only if possible and safe, disconnect the appliance from the power supply.
- Page 15 Troubleshooting — Error Code Blink Code Problem Corrective Action Normal Operation Normal Operation Unsuitable induction cooking pan. Internal wiring/coil Check pan material. connection malfunction. (2) Contact an authorized service engineer. Unsuitable induction cooking pan. Coil overcurrent. (2) Check pan material. Contact an authorized service engineer.
- Page 16 Communication problem of the RJ/Ethernet interface Contact an authorized service engineer. ( 1) If the plug is not safely accessible, the device must be switched off at the main circuit breaker. (2) The appliance switches off immediately.
- Page 17 SECTION 6 CIRCUIT/ WIRING DIAGRAM E3901i / E3902i CIRCUIT DIAGRAM...
- Page 18 E3901i / E3902i WIRING DIAGRAM...
- Page 19 E3903i / E3904i CIRCUIT DIAGRAM...
- Page 20 E3903i / E3904i WIRING DIAGRAM...