Fanimation WRAP MAD8530 Series Manual page 11

How to Wire Your Ceiling Fan (Continued)
3. Connect wires using connectors as shown in
Figure 4.
WARNING
Check to see that all connections are tight,
including ground, and that no bare wire is
visible at the wire connectors. Do not operate
motor damage could result.
L
BLACK
WHITE
N
AC POWER
L1 RED
RF ANTENNA
4. After connections have been made, put the
white and green leads to one side and the black
leads towards the other side, the connection
should be turned upward and carefully push leads
into the outlet box. The wires should be spread
apart with the grounded conductor and the
equipment-grounding conductor on one side of
the outlet box and the ungrounded conductor on
the other side. (Figure 5)
WARNING
The blades must be installed first before programming
is performed.
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
GROUND
HANGER
BRACKET
HANGER
BALL
RECEIVER
Figure 4
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Receiver (2)
(Ground)
RECEIVER HARDWARE USED:
Wire
Connectors
BLUE
BROWN
RED
GRAY
YELLOW
Green Wire
White Wire
from Supply
from Supply
(Ground)
White Wire
from Receiver
Receiver
Green Wire
from Hanger
Ball (Ground)
Figure 5
x 9
DC MOTOR
WHITE BLUE
LIGHT KIT
Listed Outlet Box
Black Wire
from Supply
Household
Supply
Red Wire
from Supply
Black Wire
from Receiver