Advertisement
CLIMATE & CONVENIENCE CONTROLS DUAL ZONE
Rightsc,een
FIGURE 6
RIGHT TOUCHSCREEN
~
~llU ~IBYl\'iID'.5
BUTION LAYOUT
1.
['nwrr
button
2.
Air
Conditioning (On/Off)
3.
f1(:c1culat1on (On/Ott)
4.
Max A'C (On/Off)
s.
r
ront Dr.frost (On/Off)
6.
Rrar
)drost
(On/Off)
7.
Irri1p.
Read ng
8.
Arld1t:on
Control
~1enu
9.
Sctt1n~s Menu
C)
Press the Power Button (Fig.6, t1)
to
toggle the climate controls On or Off.
*
Press the Air Conditioning Button (Fig.6, t2) to
tum
On/Off the air
conditioner.
An indicator
light
will
illuminate
indicating the
On/Off status of the
NC.
Press the recirculation button (Fig. 6, t3)
to
turn on air
recirculation.
A
light
will illuminate
in the
button indicating
the
~
on/off status of the Recirculate mode. Interior air will be re-circulated
inside
the vehicle. This mode helps to quickly cool
the air inside the vehicle or prevent outside air and odors from entering. Operating recirculation mode
[while
the A/C is
off] increases humidity and
may
cause the windows
to
fog. Recirculation is not available
in
the Defrost
or
Defog
modes.
MAXQ:
Mt>XA/C button (Fig. 6, #4) on the color TFT touch screen
to
turn on Max A/C. Maximum cooling will occur with the
temperature
is
adjusted to lowest cold setting and the Fan speed
is
set at maximum. Mt>XA/C is used to cool the car
down as quickly as possible. Touch the MaxA/C button again to return to the previous Fan speed and
temp
setting.
Press
the
Front Defrost (Fig6, 15) to turn Defrost ON or OFF. This configuration helps clear
front
windshield
~
of fog or moisture.Air will be directed to the windshield. A
light
will illuminate in the button indicating
the
on/off status of
the Defrost
mode.
NOTE: For best results clear the windows of snow or ice before
defrost settings. DO NOT OPERA TE VEHICLE UNTIL WINDOWS ARE CLEAR!
4il
Press the Rear
window defrost
button (Fig. 6, 13) to turn the rear
window
defogger on or off. A light
will
illuminate in the button indicating the on/off status of
the
Defrost
mode.
Rear defogger will also be
turned off by turning the ignition
to
the OFF
position.
MyTemp
j
Press the
My Temp
(Fig. 6, #7)
personalize and set temperature setting.
CTRL
Press the CTRL (Fig. 6, #8) to
display
more control settings see page 14 for
controls.
MENU
Press the MENU (Fig. 6, #9) to
display
settings
~
Press and
hold
of the Scosche
logo
(Fig. 6, #10)
until •Jnsta/ler Menu Enabled•
is displayed. Installer
S.CDsc:J.Kr
menu can be found
under
vehicle settings. Please refer to chart
Installer
Menu Chart on page
16.
Time/Temp
Current nme Display and Convenient
Fig.
(6, #11) reading of outside
temperature.
Enter menu settings
to configure Celsius or Fahrenheit.
©2021
SCOSCHE
INDUSTRIES, INC.
13
ITCFD0SAB
10/21
Advertisement
