Advertisement
INSTALLATION GUIDE
RAD/0D/SASSEMBLY
STEP 1
RADIO DISASSEMBLY
Image A: Remove the two (passenger and driver
side) knee panels on the lower console.
Image B: After removing the knee panels, Remove
two exposed screws
STEP 2
RADIO DISASSEMBLY
Image A: Using a panel removal tool, carefully re-
move the tray located below the USB and 12V socket
ports, then remove and retain two screws
exposed.
Image B: Lift and slightly pullback the center
console, but do not
remove.
STEP
a
RADIO DISASSEMBLY
Using a panel removal tool, carefully remove the
air-vent trim surrounding the ver:its, temps, and boost
control gauge; unplug and remove.
STEP 4
RADIO
DISASSEMBLY
Unclip and remove the plastic plate located
in-between the USB plug-in and the
cigarette
lighter.
©2021
S
COSCHE
INDUS TRIES, INC.
2
ITC
FD0SAB 10/21
Advertisement
