Advertisement
INSTALLATION GUIDE
RAD/00/SASSEMBL
Y
STIP '
RADIO DISASSEMBLY
Remove the four screws securing the OEM panel to
the dash; then unplug and remove the panel (see
image on the
right).
ITIP 6
RADIO DISASSEMBLY
Remove the OEM display and the CD receiver by
unscrewing the four screws for each component (8
screws total,
circled).
Next, unplug all wiring and
remove (see image on the
left).
INSTALLATION GUIDE
Dash Modification
CAUTION: Major modification required for double DIN Installation, proceed with caution.
STEP 7
Dash Modification
Carefully cut and remove the highlighted
dashed area on the sub-dash frame to create
space for the double DIN
radio.
File down the slight ridge areas highlighted
and noted on the image locate on the right.
NOTE: Only file down necessary amount to
give the UAC a flush fit.
©2021
SCOSCHE INDUSTRIES, INC.
3
ITCFD0SAB 10/21
Advertisement
