Table of Contents
Advertisement
STEP 7
STEP 8
STEP 9
6
6. Insert the new lamp. Be sure to wear cotton gloves guaranteeing a clean
lamp free from fingerprints.
7. Lift the lamp clamp lever so that it is perpendicular (at 90°) to the lamp.
8. Holding the ceramic base, attach the plug to the lamp. The plug will fit in
one direction only. It may be necessary to rotate the plug 90° to attach
it.
9. Replace the lamp access door and screw it into place. Reinstall your unit
and plug it back in.
Instruction Manual for VP900 Interceptor
www.sanuvox.com
1-888-726-8869
Advertisement
Table of Contents
