Thermostat - Brant Radiant Heaters DX2 Series Manual

DX2 Series
This heater must be installed and serviced by trained gas installation and service
personnel only.
Do not bypass any safety features or the heater's built in safety mechanisms will be
compromised.
• This heater must be electrically grounded in accordance with the Canadian Electrical Code C22.1
(latest edition).
• Applications must conform to the Canadian Electrical Codes C22.1 (latest edition) when an external
electrical source is used.
• Refer to the rating label on heater for the required amperage rating.
• Under no circumstance is the electrical supply line to the heater to provide any assistance in the
suspension of the heater.
• Neither the electrical supply line nor sprinkler heads shall be located within the minimum clearances
to combustibles.

Thermostat

NOTE: Different thermostats operate according to their particular features. Refer to thermostat
specifications for details.
The DX2 Series comes standard requiring a 120 VAC connection to the thermostat. An optional 24 VAC
internal relay (24VAOX) may be factory installed if the heater is to be controlled via a 24 VAC thermostat.
A 40 VA transformer is necessary when using the 24VAOX option (figure 3.33B).
NOTE: A relay transformer may be used in lieu of the factory installed 24VAOX option.
WARNING
!
45
3.0 Installation
• Thermostat