Brant Radiant Heaters DX2 Series Manual page 24

Installation
3.0 • Reflector Assembly
Chart 3.5 • Common Optional Accessories
Reflector Accessory
Elbow Reflector*
U-Reflector*
Side Shield Extension**
Protective Guard
* Reflectors cannot be rotated when used with a reflector elbow (RE), U-shaped reflector (RU) or side
shield (SSE).
** Refer to the Clearances to Combustibles chart see page 11 for minimum distances to combustibles
when side shield extension(s) are used.
Figure 3.18 • Reflector Shield Accessories
90° bend, highly polished aluminum reflector elbow
designed to fit atop one elbow accessory fitting.
180° bend, highly polished aluminum reflector
U-bend designed to fit atop one U-bend accessory
fitting.Reference figure 3.6
Highly polished side shield extension used to direct
infrared rays downward, away from sidewalls and
combustibles.
Used to prevent debris or objects from becoming
lodged between the radiant tube and reflector.
Required when mounting heaters below 8 ft.
Elbow reflector (P/N: RE)
Used over a 90-degree
elbow accessory fitting.
U-shaped reflector (P/N: RU)
Used over a U-bend
accessory fitting.
Description
Side shield extension (P/N: SSE)
Directs infrared rays downward,
away from sidewalls and combustibles.
24
DX2 Series
Part Number
RE
RU
SSE
PG